Active Member
|
[China]
Address: 1911 OF SHUIXIU ROAD,KUNSHAN,SUZHOU,JIANGSU,CHINA
Contact name:Lucky Xu
SUZHOU HYUNVAN CNC MACHINERY CO.,LTD. |
|
|
Same Material Semiconductor Laser Welding Machine Water Cooling 3 YEAR Warranty
Product Introduction:
Semiconductor laser welding machine is to use semiconductor laser directly,through the optical fiber transmission output
to the welding head,the use of digital control mode.the output laser power melting of components,from specific molten pool,thus realize the laser welding of work piece.The laser welding machine uses high-energy pulsed laser to weld the object. The high energy and high density of the laser pulse can make the welding smooth, the weld width is small, and the heat affected zone is small, which can complete the precision welding which cannot be realized by the traditional process.
Product Features:
1. High efficiency,high stability and low power consumption.
2. The laser has a long life and low maintenance cost.
3. Internal or external high-speed separation can be used.
Technical Parameters:
| Model Number | HYY-D1000W | HYY-D2000W |
| Maximum laser power | 1000W | 2000W |
| Single pilse maximum energy | 90J | 100J |
| The laser wavelength | 0.915µm | 0.915µm |
| Laser Welding Frequency | <=50HZ | <=50HZ |
| Laser Welding Depth | <=0.5MM | <=1MM |
| The pulse width | 0.5-20ms | 0.5-20ms |
| Control system | CNC2000 | CNC2000 |
| Standard table travel | 300*200mm | 300*200mm |
| Positioning system(GPS) | Microscope CCD | Microscope CCD |
| Power demand | 380V/50HZ | 380V/50HZ |
| Cooling mode | Water cooling | Water cooling |
| The whole machine consumes power | 1000W | 1500W |
Application:
It is mainly use for the THIN piece welding,seam welding or plastic welding of the same metal and foreign metal.
Installation environment requirements
1. Prevent vibration: The optical path of the laser welder is very precise, so the working environment must be stable. If the working environment is vibrating, the optical path of the laser welder will change, and the welding effect will be directly affected!
2, reduce dust: Because the laser equipment has a lot of optical components and sophisticated electronic components inside, so to prevent dust from adsorbing on the laser and those optical lenses, affect the quality of light.
3. Voltage standard: The voltage of the laser welding machine must
be in strict accordance with national standards, and the voltage should not have large fluctuations. If voltage fluctuations are recommended to install a voltage regulator, the working environment is recommended to stay away from high-powered equipment.
4, good grounding: only correct, good grounding can make it work properly, laser power supply, welding control system are using industrial microprocessor for digital control, only good grounding can ensure their normal and stable work.
