Beijing JCZ Technology Co. Ltd |
|
Name | Description |
To DLC | this interface is connected to the JCZ-DLC control card CON2 port |
RS232 | laser serial communication interface |
power | air plug interface, 220V AC power supply |
Fiber output (optical fiber is not shown) | the laser outputs the fiber from this position |
Optical output fiber termination
The QBH optical fiber output head (Figure 1 - QBH end output) is
provided with a protective cap for protecting the optical end
surface and the electrode that transfers the internal safety loop
of the optical fiber when not in use. When connected to an external
optical head, the protective cap must be removed. The cover shall
be removed prior to optical cleaning and immediately fixed to the laser cleaning device for cleaning.
2. Function introduction
1. This product contains the YLM-150_1500-QCW-MM-AC-Y12 laser
module of IPG company, the laser power supply module provided by
JCZ and the laser control card.
2, with the JCZ Ezcad3 software system, customers can set the laser
waveform sequence according to the demand, support up to 64
waveforms, with software function preservation, called waveform
parameters, greatly facilitate the process of debugging the
application, production and processing.
3, the JCZ Ezcad3 software system, can monitor the internal state
and abnormal state of laser in laser, laser control card for error
state timely response, effectively reduce the misoperation of laser
damage.
4, JCZ, Ezcad3 software system, for laser parameter settings to
optimize the processing, greatly reducing the emergence of laser
alarm.
5, JCZ, Ezcad3 software system, with vibration mirror welding
function, can meet most of the vibration mirror welding process
software functional requirements, software operation is simple and
easy to understand, friendly interface.