Home Companies Lingman Machinery Technology (Changzhou) Co., Ltd.

High Precision Laser Pneumatic Rotary Chuck For Laser Tube Cutting Machine

Contact Us

[China]

Trade Verify

Address: No.8-2 Dongfang East Road, Hengshanqiao, Changzhou Economic Development Zone, Jiangsu, China

Contact name:Xu

Lingman Machinery Technology (Changzhou) Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

High Precision Laser Pneumatic Rotary Chuck For Laser Tube Cutting Machine

Country/Region	china
City & Province	changzhou jiangsu
Categories	Other Mechanical Transmission Parts

Product Details

High Precision Laser Pneumatic Rotary Chuck For Laser Tube Cutting Machine

1. Descripition

This model G600J-225 is a simple structure pneumatic chuck with Φ225mm through-hole and it is full stroke. It is mainly used in laser cutting machine, plasma cutting machine and welding machine. It can bear max. 240KG pipes and max. 450KG for both main chuck and rear chuck. It can hold max. size Φ220mm round pipe and 159x159mm sqaure pipe.

The product uses the cylinder direct output, the mechanical efficiency is high, the energy loss is small, the output clamping force is big, the clamping force is stable. Because the cylinder is used to clamp the workpiece directly, the working stroke of the cylinder is the working stroke of the chuck, and the clamping range is wide. The cylinder direct output is adopted, the out put force and the air pressure are linear proportion, and software control can be easily achieved. The chuck has a simple structure, few components, light weight, low failure rate, stable performance, small moment of inertia and low energy consumption. The axial dimension of the chuck is small, and the cost for realizing the zero tailing is lower.

Except standard chucks, we also provide plans for customized chucks according to requirements.

2. Performance Parameters

Model number	G600J-225
Jaw stroke	220mm
Maximunm clamping force	1.7KN
Allowable pressure	0.25-0.9MPa
Limit speed	200r/min
Clamping range	0-220mm
Central height	350mm
Rotational inertia	6.5Kg.m2
Rotating part weight	129kg
Whole unit weight	177kg