|
[China]
Trade Verify
Address: 13 Jinjiang South Road, Shangjie District, Zhengzhou City, Henan Province
Contact name:admin
Henan Lanphan Industry Co.,Ltd |
|
Verified Suppliers
|
|
|
Thc Destillation Essential Oil Home Distillation Evaporador Industriales
The pressure difference between the boiling film and condensing surface is the driving force of the stem flow, and the minimum pressure will cause the flowing of steam. Under the 1mbar, the operation requires that there is the shortest distance between the boiling surface and condensing surface. The evaporator manufactured based on the principle is called the short-path distillation. The short-path distillation (molecular distillation) is equipped with a inside condenser which is opposite to the heating surface, and make the operation pressure reduce to under 0.001mbar. Its relative low boiling temperature is very suitable for the material with heat sensitive and high boiling point.
Distillation process: The material should be added from the top of the evaporator and continuously spread to the heating surface through the material covered on the rotor. Then, the scratch film is capable of scratching the material into a thin and flowing liquid film. During this process, the light molecular exceeded the heating surface form the condense liquid on inside condenser without any collision. Then, the molecular flows along the condenser tube, and discharges through the discharge tube on the bottom of the evaporator. The residue liquid (heavy molecule) is collected on the circular channel under the heating zone, and flows through the discharge tube on one side.
| Accessories Name | Specification | Number | Unit | |
| 1 | 2-neck Round Bottom Flask | 10L,34/45*2,24/40 | 1 | piece |
| 2 | Distiller | 34/45,24/40,14/20 | 2 | piece |
| 3 | Fractionating device | 500ml,24/40 | 2 | piece |
| 4 | eggplant shaped flask | 2000ml,24/40 | 2 | piece |
| 5 | cold trap | 80*350mm,24/40 | 1 | piece |
| 6 | cold trap cover | 70mm | 1 | piece |
| 7 | Receiving Flask | 2000ml,24/40 | 1 | piece |
| 8 | Temperature casing pipe | 14/20 | 2 | piece |
| 9 | Temperature casing pipe | 24/40 | 1 | piece |
| 10 | Hollow plug | 14/20 | 2 | piece |
| 11 | Hollow plug | 24/40 | 1 | piece |
| 12 | funnel | 110mm,24/40 | 1 | piece |
| 13 | Mercury thermometer | 0-360°C | 2 | piece |
| 14 | GL14 Cover | 8 | piece | |
| 15 | mouth clip for Stainless steel bottle | 34# | 2 | piece |
| 16 | mouth clip for Stainless steel bottle | 24# | 4 | piece |
| 17 | mouth clip for plastic bottle | 24# | 1 | piece |
| 18 | silicone tube | 8*14 | 3 | meter |
| 19 | Wood pallet | 140 | 3 | piece |
| 20 | Lifting platform (stainless steel) | 200*200 | 2 | piece |
| 21 | iron stand | 140*200 | 1 | piece |
| 22 | Cross clip | 0-20mm | 2 | piece |
| 23 | Three claw clip | large | 3 | piece |
| 24 | Experimental chain clip | 1 | piece | |
| 25 | Three links (plastic) | 8mm | 1 | piece |
| 26 | vacuum fat (50g) | 7501 | 1 | box |
| Total | 49 | |||
| 27 | magnetic stirrer heating mantle | ZNCL-T | 1 | set |
| Accessories | main engine | 1 | ||
| Vertical rod | 2 | set | ||
| Cross clip | 2 | piece | ||
| External sensor | 500mm | 1 | piece | |
| internal sensor | 1 | piece | ||
| Tetrafluoro rotors | 1 | piece | ||
| 28 | rotary vane vacuum pump | 2XZ-4 | 1 | |
| 29 | Temperature Control Low-Temperature Coolant Circulation Pump | DLSB-10/25 | 1 | |
| Short-Path Distillation | ||||
| Model | SD-2 | SD-5 | SD-10 | SD-20 |
| Material | G3.3 | |||
| Heating Capacity(ml) | 2000 | 5000 | 1000 | 2000 |
| Heating temperature(°C) | Room temperature -250 | |||
| Accuracy(°C) | ±1 | |||
| Vaccuum Degree(Mpa) | 0.098 | |||
| Working temperature(°C) | 5-40 | |||
| Voltage | 220V/50Hz or 110V/60Hz | 380V/50Hz | ||
| Package Size | 450*450*600 | 580*580*735 | 850*850*600 | |
| Weight | 18 | 24 | 30 | |
Pre-sale Service
1. According to product’s using condition, technicians will offer
rationalization proposals to assist clients to select proper types;
2. Provide detailed product performance specification;
3. Provide professional quoted price;
4. Provide 24-hour technical consulting reply.
In-sale Service of evaporador industriales
1. Begin to supervise from raw material, its qualified rate can
reach to 100%;
2. Whole manufacturing process are in strict accordance with
promised procedure requirements, product qualified rate can reach
to 100%;
3. Provide product’s inspection record of key junctures to
customers;
4. Provide production schedule photos to customers at regular
intervals;
5. Package and transport products strictly accordance with export
standard;
After-sale Service of evaporador industriales
1. Under the premise of correct installation, normal maintenance
and using, we guarantee one-year warranty period;
2. When warranty period has expired, our sold products enjoys
lifetime guarantee repair, we only charge cost price for changing
product’s standard component and sealing component;
3. During installation and adjustment period, our after-sale
service staff will communicate with customers frequently to know
product’s running state in time. Assist customers to install and
adjust products until customers are satisfied;
4. If product has malfunction during operation period, we’ll offer
you satisfied answer in time. We’ll reply you within 1 hour and
provide solution or send staff to spot within 24 hours after
receiving maintenance notification.
5. Lifelong free technical support. Conduct satisfaction survey and
inquiry equipment running condition to clients by telephone or
e-mail semiannually from the first day of equipment running, put on
records of acquired information.
