|
[China]
Trade Verify
Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China
Contact name:Lisa
Hai Da Labtester |
|
Verified Suppliers
|
|
|
Conveying Type Industrial Metal Detectors Ndc A Conveyor For
Garment / Textile
Conveying Type Industrial Metal Detectors Ndc A Conveyor For
Garment / Textile widely used in the detection cartoon toys (plush toys, soft
toys), clothing, knitwear, bedding, food (aluminum packaging),
leather, textile and other industries, for the detection of loss of
raw materials or products of ferromagnetic materials (such as iron
needle iron nails) pieces
FEATURES:
1. Cycled,9 pairs of scnsor,excellentanti-disturbance performance.
2. Based on LED bar displayed control panel.
3. Hi accuracy detection locating technology,LED indication.
4. Lovel setup indication and real-time scnsitivity display.
5. Optional conveying mode after alarm.
6. Optional automatical restart.
7. Reliability mechanical frame design,Hi stable during
detection.
8. Designed for universal AC power supply,switch power supply
working principle:
When a ferromagnetic object enters the detection channel, generate
the probe up and down through a strong magnetic field sensor signal
and sends the signal to the signal receiving and processing blocks,
and then scanned with a photoelectric sensor, high voltage blocks,
sensitivity control manifold, manifold and signal reception signal
output manifold and actuators to complete the testing.
Spectifications:
Model | W801 | |||||
Window Height | 100mm | 120mm | 150mm | 200mm | 250mm | |
Window Width | 440mm | 440mm | 440mm | 440mm | 440mm | |
Sensitivity | Fe Diameter>= | 0.6mm | 0.8mm | 1.0mm | 1.2mm | 1.5mm |
SUS Diameter>= | 1.5mm | 1.8mm | 2.0mm | 2.5mm | 3.0mm | |
Power | 220V,50HZ,120W | |||||
Technology Parameters:
Model | Industrial Broken Needle Detector Machine |
Detecting Sensitivity | diameter 0.8 mm to 2.5mm iron ball |
Sensitivity adjust | 1-10 level |
Detecting Width | 60cm |
Detecting Height | 10-30cm |
Alarm method | Buzzer,Lamp |
Conveying speed | 24m/min(50Hz),32m/min(60Hz) |
Power | AC220V |
Rated Output | 60W |
Body size | 185cm(L)*105cm(W)*95cm(H) |
Composition structure:
1, the detection sensor (probe): Detection of induction by the upper and the lower detector sensors
(position below the belt) composition
2, the circuit control system: signal amplifying circuit and signal circuit alarm system, power
supply protection circuit has three major components
3, Motor: single-phase capacitor gear reduction motor rotation
4. The conveyor belt: the role of the conveyor is to be detected by detecting articles
carrying the sensor for detecting the ladder tool, it uses a
special anti-static nylon mesh woven into the warp and weft,
adhesive special rubber surface, absolute guarantee no alarm
conveyor belt without a little iron and metal components, in order
to ensure the sensor when tested
5, the rack: rack made of steel plates, reaching Needle whole bridge effect is
the primary framework Needle multifunctional state structure,
making it more stable performance, the appearance of electrostatic
spraying, both beautiful and can be extended life.
6, the wing skin: both play a decorative appearance, the early use of aluminum
production, in terms of relative iron play a role in shielding the
signal, because the aluminum shell handmade, suitable for small
production of non-standard or custom manufacturers machines,
strength of the manufacturers have to use their own mold
engineering hard plastic shell.
7, drive shaft: stainless steel tube combined with four plane propeller shaft
bearings for rolling structure, making it more transmission
concentricity ensure smooth transmission lubrication, low noise,
low heat, long life.
8. Optical Infrared emitter: when will launch a bunch of invisible infrared working condition,
when it is played by the analyte infrared intercept and transmit
signals to the recorder, eventually qualified items were counted.
9, the control panel: used to control the machine operation and sensitivity testing,
display counting functions
