Home Companies SKYLINE INSTRUMENTS CO.,LTD

Leather Testing Equipment Display Electronic Bursting Tester With Pressure Converter

SKYLINE INSTRUMENTS CO.,LTD

Contact Us

[China] country

Trade Verify

Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China

Contact name:Ivy Xie

Inquir Now

SKYLINE INSTRUMENTS CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Leather Testing Equipment Display Electronic Bursting Tester With Pressure Converter

Country/Region china
City & Province dongguan guangdong
InquireNow

Product Details

Electronic Bursting Tester

 

Product introduction

This instrument is an international general (Mullen)-type apparatus, widely applied to packaging materials, mainly for the determination of Single and multi-layer cardboard and corrugated cardboard can also be used for silk, cotton and other non-paper materials, the bursting strength test. To put material only then automatically detect, automatic testing, automatic hydraulic recoil and automatic calculations, store test data, print instrument with digital display and can automatically print test results and data processing.

 

Standards

JIS-L1004, L1018, L1031, K6328, P8131, P8112 and ASTM-D2210, TAPPI T403, ISO2759-2001

 

Technical Parameters

 Induction Pressure Converter
 Instruction mode LCD display
 Mode of operation automatic (by pressing the test button and no clear peak)
 Power unit kpa, psi (Lbs / in ^ 2), kgf / cm ^ 2, with unit switching function
 Capacity choice high-pressure 0 ~ 100kgf/cm ^ 2 (0.1kgf/cm ^ 2)
 Clamping ring material stainless steel SUS # 304
 Clamping ring diameter upper and lower clamping ring diameter φ31.5 ± 0.05mm
 Hydraulic oil 85% glycerol, 15% distilled water
 Pressing speed high-pressure 170 ± 10ml/min
 Horse Power 1/4HP motor vibration
 Dimensions (L × W × H) 430 × 530 × 520mm
 Weight 64kg
 Power source 1 ∮, AC220V
 Standard configuration a rubber membrane, a wrench, calibration film 10, a bottle of glycerin.

 

How do you test bursting strength?
 
Summary of Test Method
A specimen is clamped over an expandable diaphragm. The diaphragm is expanded by fluid pressure to the point of specimen rupture. The difference between the total pressure required to rupture the specimen and the pressure required to inflate the diaphragm is reported as the bursting strength.

Hot Products

16 CFR 1611 Vinyl plastic film flammability tester ,SPI Flammability Tester Product information SPI ...
Thermal Conductivity System Tester Application Applicable to: thermal conductivity of clay and sand ...
Flame Retardant Wood Burning Test Device Application Indoor decoration wood products burning ...
Thermal Insulation Rock Wool Thermal Load Test Device Application Suitable for rock wool, slag wool ...
Insulation Material Maximum Use Temperature Tester Uses Applicable to the evaluation of the maximum ...
Conveyor Belt Roadway Propane Combustion Performance Test Device Uses Propane burning performance ...