SKYLINE INSTRUMENTS CO.,LTD |
Verified Suppliers
|
|
ISO8124-4 Durability Tester for Suspension Connector of Swings
Product information
Suspension connectors and means of suspension are cycled 180 000
times under load to simulate use.
For the safety of children when they are playing on swings, a
durability test machine is recommended to check if the suspension
connector is robust enough after many times of use.
Procedure
Attach each type of swing element to its support member in
accordance with the installation instructions, and mount in a
suitable test fixture.
Flexible components of the swing element may be replaced by rigid
components of at least the same size and mass, as long as the
alternate components do not affect the moving parts of the swing
element.
Secure the appropriate test mass to each occupant position to be
tested.
Oscillate this suspended unit through an arc with an included angle
as specified for a total of
180 000 cycles (forward and backward).
Determine whether any loosening or structural failure of the
suspension connector occurs.
Technical Parameter
Load | 6.75kg,13.5kg,18.5kg,30kg |
Swing angle | ±5°~±45°(10°~90°) |
Test speed | 1~60r/min |
Standard | ISO8124-4.6.8 |
Suspension Connector Durability Tester.pdf
Contoller PLC
Technical parameters: