Active Member
|
[China]
Address: The Third Industrial Area,Jingshan Village,Chashan Town,Dongguan City ,China
Contact name:
Dongguan Xinbao Instrument Co., Ltd. |
|
|
Air to Air High Low Temperature shock Chamber , Thermal Shock Test Chamber
Applicable Industries
Air to Air High Low Temperature shock Chamber , Thermal Shock Test
Chamberr used to test the material structure or composite material
in an instant by the extremely high temperatures and very low
temperature continuous environment which can endure the degree of
order in the shortest possible time to test its thermal expansion
and contraction caused by chemical changes physical harm.
The applicable the object material, including metals, plastics,
rubber, electronic, etc., can be used as the basis of its product
improvement of reference.
Specification
| Model | XB-OTS-50 | XB-OTS-80 | XB-OTS-150 | XB-OTS-225 | XB-OTS-408 |
|---|---|---|---|---|---|
| Internal size WxHxD(cm) | 36×40×35 | 40×50×40 | 50×60×50 | 60×75×50 | 80×85×60 |
| External size WxHxD(cm) | 148x175x160 | 150X175X165 | 155x185X165 | 165x200X175 | 185x210x185 |
| Shock Temperature ragne | -65°C~150°C | ||||
| Heating up time | RT~200°C about 35min | ||||
| Cooling down time | RT~-70°C about 90min | ||||
| Temp recover time/change time | ≤ 5min | ||||
| Temp control accuracy | ±0.5°C / ±2.0°C | ||||
| distribution accuracy | |||||
Control
Operation and settings simplified by the use of a touch-screen LCD display (instructions displayed on-screen). At-aglance confirmation of test patterns, test area temperatures, temperature cycles, and trend graph displays.
| Setting | Interactive key input by touch panel |
| Display | LCD (5.7 inches) |
| Temperature control function | Test area: exposure temp. Hot chamber: pre-heating temp. Cold chamber: pre-cooling temp. |
| PID control | |
| Preset temperature range | High temperature: 60 to200’C Low temperature: -78 to 0’C |
| Setting resolution | 1’C |
| Input | Thermocouple type T (Copper/Copper-Nickel) |
| Setting and indication ranges | Preset time: 0 min. to 99 hours and 59 min. Preset cycle: 1 to 9,999 cycles |
| Accessory function | Timer preset Overheat/ overcool protection Power failure/ recovery selection Temperature recovery time setting Program memory Automatic power shut-off Programmed time display Test completion mode selection Trend graph Alarm history display Sensor calibration RS-232/ USB communication |
Features
1.Thermal shork chamber in each zone for peak demand of heating and
cooling. Provides extra thermal energy to efficiently meet the
MIL-STD 883 requirements.
2.Temperature recorder provides 24 hour part temperature recording
as the load travels from zone to zone. Using touch-control graph
control as operation interface, easy to operate.
3.The system can be used for automatic Circulation Shock or manual
selective shock, capable of setting two zones or three zones shocks
as well as cold and thermal shock start-up.
4.Custom-made and optional accessories available.
Corresponding Standard
GB11158 GB10589-89 GB10592-89
GB/T10586-89 GB/T2423.22-2001 GB/T2423.1-2001
GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93
ASTM D1735 EIA - 364-59 IEC60068-2-1.1990
IEC60068-2-2.1974 IEC 68-2-30 IEC68-2-03 EIA - 364-31C
Notes
1) If the high-temp exposure range lower limit + 60°C is required or the low temp exposure range lower limit -60°C, please select the “ambient-temperature exposure” option
2) If the temp fluctuation need to below ±1.8°C please select the “Low temp fluctuation package”
3)Temperature heat-up/pull down time are applicable only during independent chamber operation
4)If the automatically operated sliding door required, please select the “Automatically door package”
5) Air-cooled condenser / Water-cooled condenser both available
