Active Member
|
[China]
Address: The Third Industrial Area,Jingshan Village,Chashan Town,Dongguan City ,China
Contact name:
Dongguan Xinbao Instrument Co., Ltd. |
|
|
Programmable Walk-In Temperature Humidity Climatic Chamber for Vehicle Testing
Introduction:
Programmable Walk-In Temperature Humidity Climatic Chamber for
Vehicle Testing serves as a test site for large components,
assemblies, and finished products in electrical and electronics,
aerospace, batteries and automobiles, etcOTS manufactures both
Static Walk-In Chambers and Dynamic Walk-In Chambers and can be
configured as a temperature chamber or a temperature humidity
chamber.
The OTS-Series walk-in temperature and climate test chambers are
especially developed for large test specimens. Size and design are
optimal loading of test specimens. The modular construction and
variability in size and equipment is ideally forspecific
application.
| Model | XB-OTS-10A |
| Volume | 10m3 , 15m3 , 20m3, 30m3, 50m3, 100m3 , as per customer requirements |
| Temperature range | -65 °C ~+80 °C |
| Humidity range | 20%~95%R.H. |
| Accuracy/uniformity | ±0.1 °C , ±0.1%R.H. / ±1.5 °C ,±5.0%R.H. |
| Accuracy/volatility | ±1.0 °C , ±2.0%R.H./±0.5 °C , ±3.0%R.H. |
| Cooling time | 5.0 °C /minute |
| Inside material | SUS#304 Stainless Steel |
| Insulation material | High-temperature high-density amino acid ethyl ester foam insulation materials, |
| Cooling system | Water-cooled / two-stage compressor |
| Protection | No fuse switch, compressor overload switch, high and low pressure protective switch, over-humidity-temperature protective switches, fuses, warning system |
| Accessories | recorder(option), view window, 50mm diameter testing hole, PL lamp, clapboard, Dry and wet gauze ball |
| Controller | German Siemens PLC or TH-900C Korea or TEMI |
| Compressor | France's Tecumseh Brand or Germany Bitzer |
| Power | 1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz |
Control method and characteristics:
Precision microcomputer control temperature and humidity system, with PID control the refrigerant flow to make the system's heating / humidification reduction, to achieve low power consumption, energy saving, carbon reduction effect, cooling, heating, humidity control intelligent electronic control, long-term stable use.
Optional accessories:
1. Cable Port: Two size of cable port is available: &50mm,
&100mm.
2. Double door
3. Pass room: Provided to avoid disturbance of atmospheric
temperature and humidity while opening the door.
4. Floor reinforcement: Can be fixed if heavy specimen placed in
the chamber for test.
5. Carry-in inclined platform: Provided below the door to
facilitate moving of specimens in and out through the door.
6. Entire ceiling blow-out duct
7. The extremely wide air inlet reduces the airflow rate (down to
apprrox.0.5m/s)
8. Dehumidifier
9. The rotation regenerating dehumidifier (M-300)ensures precise
control of low humidity (21°C,23%RH)for electrostatic reliability
tests.
10. Temperature and humidity recorder
11. 100mm width recording paper with 6 dots
12. 180mm width recording paper with 12 dots
13. Status indication lamp
14. Provide to signal chamber status and warnings when normal
running, a malfunction running or stand by occurs.
15. Water purifier
16. Provided to keep the humidifier heater free from scale and
ensure the supply of water to humidifier.
17. Power socket
Package and shipment
(1). Strong standard wood case, inner plastic films wrapped for Programmable Walk-In Temperature Humidity Climatic Chamber for Vehicle Testing.
(2). Usually we delivery the equipment by air,by sea or by express. it depends on customer.
