Active Member
|
[China]
Address: The Third Industrial Area,Jingshan Village,Chashan Town,Dongguan City ,China
Contact name:
Dongguan Xinbao Instrument Co., Ltd. |
|
|
Neutral Nozzle Salt Spray Test Chamber Electric Driven AC 220V 50Hz Power
Introduction:
Neutral nozzle salt spray cyclic corrosion test chamber for metal testing used to check corrosion resistance of materials and surface coatings. Usually, the materials to be tested are metallic (although stone, ceramics, and polymers may also be tested) and finished with a surface coating which is intended to provide a degree of corrosion protection to the underlying metal. Salt spray testing is an accelerated corrosion test that produces a corrosive attack to coated samples in order to evaluate (mostly comparatively) the suitability of the coating for use as a protective finish.
Technical parameters:
| Model | XB-OTS-60 | XB-OTS-90 | XB-OTS-120 | XB-OTS-160 | XB-OTS-200 |
| Inner size (cm) | 60x45x40 | 90x60x50 | 120x80x50 | 160x100x50 | 200x100x50 |
| External size(cm) | 107x60x118 | 141x88x128 | 190x110x140 | 230x120x140 | 270x150x150 |
| Inside temp | Brine test method(NSS ACSS)50°C±1°C Corrosion resistance test method. | ||||
| (CASS)50°C±1°C | |||||
| Brine temp | 35°C±1°C 50°C±1°C | ||||
| Test chamber volume | 108L | 270L | 480L | 800L | 1440L |
| Brine chamber volume | 15L | 25L | 40L | 40L | 40L |
| Compressed air pressure | 1.00±0.01kgf/cm2 | ||||
| Spray volume | 1.0~2.0ml/80cm2/h (Collect at least 16 hours, the average) | ||||
| Test room relative humidity | 85%RH or more | ||||
| PH | 6.5~7.2 or 3.0~3.2 | ||||
| Spray method | Programmable spray (including the continuous spray interrupted spray) | ||||
Protective system | 1.The over temperature of whole machine. 2.Automatically cut the power off when the water level of test chamber or pressure bucket is below the standard. 3. The entire machine is set with a timer and alert of overflow, electronic leakage, light circuit. | ||||
Design Standard:
GB-T2423.17-1993 Humidity and salt spray test
GB/T 12967.3-91 CASS test
ASTM.B117-97 Humidity and salt spray test
GB/T 10125-2012 Corrosion tests in artificial atmospheres; Humidity and salt spray test
* GB/T 2423.18-2000 *GB/T 10125-1997 ASTM.B117-97
*JIS H8502 *DIN50021*JIS Z2371 * IEC68-2-11*QJ 2027-1990
*IEC68-2-52 1996 *GB.10587-89 *EN 14147*SH/T 0081-1991
*CNS.4158 * CNS.4159 CASS*GB/T 12967.3-91 CASS
Thermostatic control can be set under CNS, JIS, ASTM standard:
Ⅰ Humidity and salt spray test: NSS,ACSS
1) Temperature of test box: 35℃±1℃
2) Temperature of pressure bucket: 47℃±1℃
Ⅱ Corrosion resistance test: CASS
1) Temperature of test box: 50℃±1℃
2) Temperature of pressure bucket: 63℃±1℃
Supply system: the pressure is 1kg/cm²
Spray measurement 1-2mI(mI/80cm²/h)(average in 16 hours)
Spray way: Continuously.
Features:
1. Temperature of machines are controlled by PID which is highly precision and stable, so it ensures the fluctuation of humidity and temperature, as well as test operation.
2. The temperature control is adopted by P.I.D＋S.S.R so that to improve the stability and service life of the screen and accessories. The touch screen is able to display data and settings at the same time.
3. The automotive water tap is with a filter to prevent blockage of pipes and extend the machine’s service life.
4. In the test chamber , there is a automotive overflow protection device instead of manual work, which improves production efficiency.
5. The heat system is equipped with titanium alloy device. It is corrosion- resistance and rustless, and it also has a repair hole for convenience.
6. The oil water separator is from a famous Taiwan brand ---SNS and with 2 cups. So it can improve the accuracy of tests.
7. The pressure bucket, also called saturated air barrel, is made with SUS304 stainless board. It is to compress the air into humidity and oil filter as a core part of this machine.
FAQ
1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers.
If your machine doesn’t work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2. What’s the delivery term?
At most of time, we have stock in the factory. If there is no
stock, normally, the delivery time is 15-20 working days after
deposit receipt. If you are in urgent need, we can consider making
a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the
machine?
Yes, of course. We can not only offer standard machines, but also
customized
machines according to your requirements. And we can also put your logo on the machine.
4. How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
