Introduction
The instrument is suitable for detecting the drop melting point of
petroleum wax and grease. The instrument adopts computer automatic
control, real-time curve display sample temperature, and simple
operation.
The test principle is to immerse the cooled temperature sensor
vertically into the sample to make the sample adhere to the
temperature sensor, then put it into the test tube, heat it
according to the required heating rate and start melting the sample
until the sample on the sensor drops the first drop. At this time,
the temperature of the sensor is the low melting point of the
sample.
Main Features:
1. The drop melting point of the sample is automatically detected,
and no special person is required to monitor the
experimental process, and the end of the experiment is
automatically notified;
2. Semiconductor refrigeration, compared with conventional water /
oil bath, has the advantages of simple operation,
higher reliability and less noise;
3. Metal bath heating, safety and environmental protection;
4. High precision sensor can capture the dropping process of
paraffin and get the experimental results in time;
5. A circulating ventilator is set inside Automatic Drop Melting
Point Tester;
6. Automatic Drop Melting Point Tester has overtemperature limit
setting;
7. High precision PT100 temperature sensor is used, with high
measurement accuracy of ± 0.1 ℃;
8. Using the touch screen display, the reading is clear and
Technical specifications
Applicable standard | GB/T8026,ISO6244,ASTM D127 |
Temperature controlling range | 16 ℃ ~ 150 ℃ |
Temperature control mode | imported digital display PID temperature controller. |
Temperature controlling accuracy | 0.1℃ |
Detection method | Automatic test and display result |
Display method | LCD Touch screen |
Refrigeration mode | semiconductor refrigeration |
Heating method | electric heating tube heating |
Power supply | AC220V±10% 50HZ |