|
[China]
Trade Verify
Address: Hi-tech Developing Industrial Area, Liuyang City,Changsha,Hunan Province,China
Contact name:Sandy
Advanced Instruments Co.,Limited |
|
Verified Suppliers
|
|
|
Introduction:
MFR Thermoplastics Melt Flow Rate Tester is deisgned and manufactured according to ASTM D1238-98 and ISO1133;
It is suitable for testing fluorine plastic, nylon and other engineering plastics, it is also used to test polyethylene (PE), polypropylene (PP), polyacetal (POM), polyphenylene ethylene (PS) ABS resin, polycarbonate and other plastics.
Features:
Specifications:
| Test Method | Quality Act (MFR) |
| Temperature range | 20 ~ 400 ºC; accuracy of ; 0.1 ºC |
| Temperature accuracy | ± 0.2 ºC |
| Resolution | 0.1 ºC |
| Index range | 0.1-400.00g / 10min (MFR) |
| Time accuracy | 1 S |
| Load | 0.325kg, 0.875kg, 0.96kg, 1.2kg, 1.64kg, 5kg |
| Material cutting modes | manual, time control |
| Scraper | Auto / Manual |
| Barrel inner diameter | 9.550mm ± 0.025mm |
| Barrel length | 160mm |
| Die | made of tungsten carbide, length: 8.000mm ± 0.025mm inner diameter: 2.095mm ± 0.005mm |
| Dimension | 51cm * 37cm * 60cm |
| Weight | 25kg |
| Power supply | AC220V±10%, 50Hz |
