Advanced Instruments Co.,Limited |
Verified Suppliers
|
|
High Temperature Foaming Characteristics of Lubricating Oils:
This Lubricating Oils Foaming Characteristics Tester is suitable for testing the foam properties of lubricating oils at
150ºC. The sample was heated to 49ºC, kept at a constant
temperature for 30 min, and then cooled to room temperature. Then
the sample was transferred to a specified cylinder and heated to
150ºC. The air was passed through the metal diffusion head
according to the standard etiquette and ventilated for 5 min,to
determine the amount of static foam and the amount of exercise foam
immediately before stopping ventilation, and the amount of static
foam, the time the foam disappears, and the percentage increase in
total volume after a specified period of time after cessation of
ventilation.
Features:
1. The Lubricating Oils Foaming Characteristics Tester is split and includes a heated bath and an accurate flow meter.
2. High temperature resistant borosilicate glass
cylinder,Φ300×450mm, in line with standard requirements.
3. Environmentally friendly oil bath heating, reducing the damage
of oil smoke to the human body, efficient heat insulation effect.
4. Stainless steel heater
5. Very accurate flow meter with precise control at 200mL/min ±
5mL/min.
6. Air filter with glass wool.
7. Microprocessor thermostat and PID control, digital display
temperature, accuracy 0.1ºC, Pt100 RTD temperature probe.
8. Operating temperature range: room temperature to 150ºC; safety
measures to prevent overheating or low liquid level.
Parameters:
Applicable standards | ASTM D6082, SH/T0722 |
Temperature control mode | imported PID digital display thermostat |
Temperature control accuracy | ±0.1ºC |
Temperature control range | normal temperature ~ 150ºC |
Heating method | water bath heating |
Machine power | 2.5KW |
Working unit | 2 tubes |
Flow control | electronic flow meter, LCD touch screen digital display |
Timing mode | LCD touch screen automatic timing |
Working power supply | AC220V/50Hz |
Picture of ASTM D6082 Lubricating Oils Foaming Characteristics Tester: