ECE R118 Burning Rate and Flame Propagation Test Equipment

Introduction

ECE R118 concerns the burning behaviour of materials used in the interior construction of certain categories of Motor Vehicles.

It includes 5 test equipment as below:

1.Test to determine the horizontal burning rate of materials

2.Test to determine the melting behaviour of materials
3.Test to determine the vertical burning rate of materials
4.Test to determine the capability of materials to repel fuel or lubricant
5.Test to determine the resistance to flame propagation of electrical cables

Interior Materials Flammability Tester (Touch Screen)

Products

This tester is designed and manufactured according to ISO3795 standards specified in the relevant clauses. Apply to identify vehicles (cars, multipurpose passenger car, truck and bus) interior material horizontal burning test. Car inner decorations combustion tester is composed of test part and control part adopts the integrated design, convenient installation and debugging. A high degree of automation control system, with functions of automatic ignition. Temperature and time digital display, easy observation records, stable and reliable use.

Features:

1, Advanced industrial appearance and control design;

2, Stainless steel structure housing; bottom ventilation hole spacing: horizontal 63.5mm, longitudinal 127mm.

3, The number of ventilation holes: 10, diameter 19mm.

4, An inner diameter of the burner Φ9.5mm. Blowtorch top center at the free end of the specimen from 19mm

5, Flame application time and timing (combustion) time

6, It can be adjusted within the range of 0 to 9999 seconds.

7, Equipped with:stainless steel sample holder and sample templates;

8, Combustion chamber built steel ruler; precision: 1mm; combustion length can be easily read; do not remove the sample measurement burn length;

9, The use of imported Bunsen Hamburg America, combustion flame higher precision, adjustment range 20mm ~ 100mm.

10, The flame measuring device; flame height 38mm

11, A high degree of test automation, test data accurate, easy to operate

Programmable Logic Controller (PLC) touch screen plus automatic control system

1, Automatic timing, automatic ignition, ignition abnormal protection;

2, 6 sample test data is saved;

3, Text display;

4, Real-time monitoring of experimental data, query six samples of experimental data, query alarm contents.

Specification

Material Melting Characteristics Tester

Introduction

This instrument meets international standards NF P92-505, EU 95/28/EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. According to NF P 92-505 request, the test is additional for M-class building materials. It is suitable for hot melt material effect in the primary heat source to evaluate the performance of dripping and burning performance testing. Flexible and thin materials can also be tested.

Specifications

1. All fixtures are made of stainless steel material, appearance nice and corrosion resistance;
2. Radiation bracket can be rotated, the rotation angle is greater than 90 degrees and easy to install the sample;
3. Sample installation height can be adjusted;
4. The radiation heat of the radiator is 30KW/m2, up to 100KW/m2.
5.Output power of electric radiator: 500W .
6. The radiant heat radiator can be adjusted linear through the power control automatic adjustment;
7.The radiation shield is a quartz glass and the opening diameter is 100mm ± 5mm.
8.The heat radiation reach to to3W / cm³ the position 30mm from the radiation shield plane.
9. Sample holder ring is made of stainless steel and the inner diameter is 118mm.
10.Take off the plate inner diameter is 118mm, depth 12mm,internal plug of cotton.
11.Radiation cone can move up and down.
12.Automatic timing warning of sample ignition.
13.Radiometer imported from the USA which range is 0~100Kw/m2
14.Dimension: 500mm(L)×400mm(W)×700mm(H)

15.Weight:50kg

Vertical Burning Rate Tester

Features:

1.Cabinet painted with transparent viewing window;
2.The combustion chamber dimensions: length 1000 mm x width 680 mm x height 1000 mm;
3.Electronic automatic ignition;

4.The ignition time set arbitrary 0 ~ 99.99 seconds, continued burning time and flame time are automatically recorded, digital display;

5.The flame height 10mm to 120mm,adjustable.With flame temperature measuring device.

6.The burner is fixed on the sliding track, which is convenient for operation. Automatically timing when pushed to the burning position.

7.Equipped with imported needle valve to accurately control gas flow and adjust flame height.

8.Equipped with imported burner; more stable flame heat release.

9.Import pressure gauges and pressure regulating valves to regulate gas pressure;

10.PLC + touch screen intelligent control system mkes the test process more convenient and simple.

11.Automatic ignition, automatic timing, automatic storage of test data;

12.Automatic recording of combustion time, automatic calculation and storage of combustion rate.

13.When three sets of reticule are burnt out, the weights will fall off automatically and the time will be counted automatically.

14.Option: Thermal anemometer.

15.Option:The thermal printer can print the test report on the screen at any time.

15.Option:The gas detection and control system has the functions of detection of gas leakage, audible and visual alarm and automatic cut-off of gas source. It can carry out real-time gas monitoring on the combustion test manifold equipment and test site to effectively guarantee the safety of equipment and people.

Technical Parameters:
1.Automatic timing: 0-999.99 seconds arbitrary setting

2.After flame time and flame retardant time timer: 0-9999.99 s, accuracy: ±0.1 s
3.Flame height ruler: 40mm

4.Gas supply:Mixture of propane and butane, or butane.
5.Weight:about 60kg,dimension:1200(L)*600(W)*1300(H)

Resistance to Flame Propagation Tester

Introduction

This equipment is designed and manufactured according to the test requirements of QC / T 730-2005 and ECE R118 Annex 10 automotive electrical cable burning test. This integrated machine is intelligent, with PLC and touch screen intelligent control; automotive cable burning test program; you can freely select the required test program on the screen after booting; the program time is freely set, the system automatically controls the ignition time and automatically records the test time , flameout time, etc .; the test data system is automatically saved and can be freely recalled.

Cabinet and clamp

1.Cabinet size: length 1200mm X width 600mmX height 1300mm;

2. Oversized test cabinet 0.55m³ to ensure sufficient air supply for the test;

3.Paint baking treatment of the cabinet; internal baking black paint (standard requirements) ,corrosion resistance;

4 The tester is composed of a test part and a control part and adopts an integrated design, which is convenient for on-site installation and debugging.

5.Large-scale glass observation window, beautiful and elegant; easy to observe the burning state of the sample;

6.Advanced industrial appearance design and test operation consider ergonomic design, easy to touch the sample.Burner rod design makes it easy to operate;

7.304 stainless steel flame height scale, accuracy 0.5mm;

8.Stainless steel wire sample holder

Burner and gas control

1.The burner angle can be easily adjusted from 0 to 45 degrees;

2. The Bunsen burner imported from the United States has a tube length of 100mm ± 10mm and an inner diameter of 9.5mm ± 0.3mm; it fully meets the requirements of the IEC60695-11-4 standard;

3. The burner itself can adjust the flow rate and air intake;

4. Imported flow meter and precision needle valve can accurately control the combustion gas flow;

5. Imported high-precision pressure regulating valve and pressure gauge 0 ~ 0.4Mpa;

6. Precise control of blue flame height 50mm ± 2mm; total height 100mm;

7.The top is equipped with a smoke exhaust fan device. After the test, the exhaust gas generated by the combustion is discharged.