Home Companies Advanced Instruments Co.,Limited

ASTM D95 Oil Petroleum Testing Equipment for Water Content Test Manual Operation

Advanced Instruments Co.,Limited

Contact Us

[China] country

Trade Verify

Address: Hi-tech Developing Industrial Area, Liuyang City,Changsha,Hunan Province,China

Contact name:Sandy

Inquir Now

Advanced Instruments Co.,Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

ASTM D95 Oil Petroleum Testing Equipment for Water Content Test Manual Operation

Country/Region china
City & Province changsha hunan
InquireNow

Product Details

ASTM D95 Petroleum Oil Water Content Testing Equipment by Distillation Method
 
Summary
This water content analyzer is made and designed as per GB/T260 Standard Test Method for Water in Petroleum Products and ASTM D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. This instrument is suitable to determine the water content of petroleum products according to the test method specified in GB/T260. It is also suitable to determine the water content of lubricating grease according to the test method specified in GB/T 512 Test Method for Water Content of Lubricating Grease.
 
I. Main technical features
1. The water content test instrument is designed totally meeting the requirements of GB/T260.
2. The gripper of instrument is designed reasonably. The installation and dismantlement of condenser are convenient.
3. The heating power is continuously adjustable. The voltmeter displays the power visually. The temperature control is reasonable.
 
II. Main technical specifications
1. Power supply: AC(220±10%)V,50Hz
2. Heating power of electric furnace: 1000W
3. Heating control: Can be continuously adjusted by a silicon knob
4. Ambient temperature: ≤35℃
5. Relative humidity: ≤85%
6. Maximum power consumption: 1100W
 
III.Accessories
No.ItemUnitQtyRemarks
1Upright columnPiece1 
2Clamp holder of condensation tubePiece1 
3Condensing tubePiece1 
4Receiving tubePiece1 
5Round-bottomed flaskPiece1 
65A fuse (Ф5 × 20)Piece2 
7Rubber tube (Ф22 ×3) - 0.2 metersSection1 
8Silicone tube (Ф12 ×2) - 6 metersPiece1Cut when user needed
9The connection head of the water inlet pipePiece1 

 

Picture of Double Units ASTM D95 Water Content Tester

Hot Products

ISO9239 FRPT.pdf Introduction: Critical Radiant Flux is the main parameters of the fire risk for ...
Introduction This Fire Test Equipment is developed base on the standard AS1530.2, test for ...
Introduction: The BS 476-12 Ignitability Tester is designed according to the BS476-12:1991. Method ...
Product Introduction The smoke toxicity test device (squirrel cage method) is applicable to the GB/T ...
Roofing Fire Test Equipment with Burning Brands by ENV 1187 Test 1 and ISO 12468-1 Product ...
Product Introduction Smoldering characteristic test furnace is mainly used in the fire performance ...