Advanced Instruments Co.,Limited |
Verified Suppliers
|
|
Introduction
This instrument is a fully Automatic Pour Point and Solidification
Point Analyzer controlled by a computer.
User only need to install a glass test tube with a sample into a
cold bath, and the instrument will automatically test according to
standard requirements.
Main Features
1. The Automatic Pour Point and Solidification Point Analyzer
mainly consists of refrigeration system, control system,
measurement system, etc.
2. The refrigeration system consists of a two-stage refrigeration
unit, using internationally advanced compressor cascade
refrigeration technology, which has the advantages of fast cooling
speed and low cooling temperature.
3. The control system mainly consists of a heater, sensors, cold
trap, and temperature control circuit, which has the advantages of
fast response speed and high temperature control accuracy.
4. Measurement system is composed of test tubes, test sleeves,
photoelectric detection devices, tilt racks, etc. The tilt frame
can tilt 45 degrees according to the national standard requirements
and has a detection result display prompt function. This device can
reduce experimental errors and improve the accuracy of the
experiment.
Technical Specifications
1. | Applicable standard | ASTM D97,GB/T510,GB/T3535 |
2 | Solidification measuring range | light oil within 5ºC~-70ºC |
3 | Resolution | 0.1ºC |
4 | Temperature controlling range | 25ºC~-70ºC |
5 | Temperature controlling accuracy | ±0.1ºC |
6 | Test position | 2 holes |
7 | Refrigeration system | two-stage cascade refrigeration |
8 | Display method | 8-inch color LCD touch screen |
9 | Printing | thermal printer |
10 | Ambient temperature | 5~40ºC |
11 | Related humidity | ≤80% |
12 | Power supply | AC220V ±10% 50Hz±1Hz |
13 | Power consumption | ≤600W |