Class B Autoclave Steam Sterilizer With 3 Times Vacuum , Fuzzily Computer Controlled

Class B Autoclave Steam Sterilizer With 3 Times Vacuum , Fuzzily Computer Controlled

Model:MC-KM16

What are the features of our dental Steam Sterilizer ?

• Standard Class B with three times vacuum and drying, the remaining temperature of sterilized instrument is less than 0.2%.
• The vacuum data can reach -0.8bar,it fits various instrument,including package,unpackaged,solid,hollow,multi-apertures and inset pipes. It makes sure the instrument can be sterilized completely.
• Fuzzily computer controlled, digital bright show. The interface is modularized panel for easy operation.
• It is installed with BOWIE&DICK which measures the penetration of water steam.
• it has vacuum text which can make sure the ability of texting vacuuming.
• Sterilization cycle self-comment.
• Fast and independent steam generator.
• Large capacity instrument tray made of SS. SU304.
• Safety lock and triple temperature.overload protecting
• Auto/Manual water adding
• Inset cleaning device
• Special function of creating medicine cotton and sterilizing rubber items
• Handsome aspect and good quality
• Cristal LCD display
• 5-Button panel with the LCD display, so convenient.
• Warning message, Error is made easier to judge.

Technical data

Use tips

• Please place the sterilization on a plane place , which could adjust the height by adjusting foot pad
• Please adopt distilled water to extend the service life
• Don't block the heat removal system on the surface of sterilization
• Please put the instruments on the tray not touching one another allowing space for steam to pass through
• Please empty the used water tank frequently. Usually it need empty when the clean water in the reservoir is empty.
• Please ensure the door handle is closed tightly
• Never try to open the chamber door if and when the pressure display doesn't show "0.0"
• Please cut off the power and cool down the auto clave before maintenance
• Don't drag the machine while moving
• Power connection must be grounded properly
• Must be provided enough power. (23L:2300VA/18L:1800VA)
• While the outside temperature is too low, please pre-heating the machine without instruments for 30 minutes
  before sterilize
• Don't cut off the power to stop the machine directly. If you need stop the machine directly, please press the
  "START/STOP" button for 3 seconds.

More pictures