Surface Roughness Tester 0.02mm Medical Device Testing Equipment

Surface roughness tester

Environmental Science:
Working temperature: - 10 ～ 40 ℃
Relative humidity: 45% - 80%
Power supply voltage: 220 V ± 22 V
Power grid frequency: 50 Hz ± 1 Hz
Equipment power: 1500W
It adopts 5.7 inch (120 × 90) PLC (delta) LCD multi-color screen Chinese menu display;
(1) The automatic feeding system is designed to continuously feed at least 100 pieces each time, and the test space is fully automatic;
(2) The feeding system can communicate with measuring instrument and microcomputer;
(3) The feeding system has software and hardware protection, travel protection, overload protection and other multiple protection functions;
(4) In consideration of possible misoperation, it is equipped with reliable safety protection cover and has detection and protection function at each step. At the same time, protection measures are taken into account for the links and parts of the whole system that are prone to potential safety hazards;
(5) The automatic feeding system is equipped with power failure protection device, and the automatic feeding system should have the function of sound and light alarm for fault;
(6) Operation mode of feeding part: turn on the power supply, the motor rotates to drive the synchronous belt, and the synchronous belt reaches a certain position;
(7) The robot arm is informed to grab the sample, and the grab sample is set by the robot arm controller. The position can be set arbitrarily, and the distance position accuracy can reach 0.02mm;
(8) Through I / O, the front-end module of punch, feeding mechanism and robot arm roughness meter are interconnected, and the manipulator is informed to grasp when the sample is in place;
(9) Send it to the roughness meter and inform the roughness meter to test the roughness. After the test, the robot arm is informed to send three points to test the position and the reverse side;
(10) Mechanical arm technical parameters: one side and two sides of the test can be directly set by the manipulator controller. After the test, the robot arm is informed to grab the pattern and send it to the material frame, and then grab the second sample for the next test. The test speed is 4 minutes / piece). The brand of manipulator: ABB brand, six axis linkage, more accurate position adjustment;