Home Companies shanghai kerang technology co ltd

Integrated Electric Testing Equipment For Circular Saw Switch Lower Guard

shanghai kerang technology co ltd
Active Member

Contact Us

[China] country

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Contact name:iven

Inquir Now

shanghai kerang technology co ltd

Integrated Electric Testing Equipment For Circular Saw Switch Lower Guard

Country/Region china
City & Province shanghai shanghai
InquireNow

Product Details

Integrated Test Device For Circular Saw Switch And Lower Guard

 

Standard: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3.

Application: It is used to test the circular saw switch performance and circular saw lower guard’s durability and recovery time.

Test sample: Circular saws

Feature: This equipment is composed of two parts, the mechanical system and electrical control system.

 

Mechanical system is the table for circular saw. There are a switch and sample socket on the table, operator can push the switch to turn on or off the load power supply to the test sample; different sizes of circular saws can be placed and fixed on the table; on the table, device for locking the switch of the hand-held circular saw in the “on” position; the blade can extend to the bottom of the table through the middle groove; on the table where under the blade, there are a the lower guard putter and two position sensors , which can be drive the lower guard of the circular saw to be opened or closed.

 

The electrical control system consists of the load power supply, MITSUBISHI PLC, 7 Inch Touch screen and etc. Can achieve manual operation and automatic operation.

 

Parameters:

 

No.:Serial No.:ParameterRemark
1Input Power220V/50Hz 
2Control SystemMitsubishi PLC, 7-inch touch screen 
3StationOne 
4Built-in Load0~250V/5KW voltage regulator, equipped with B socket 
5Test Cycles0-999999, can be preset 
6Test Speed≥10 freq/min 
7Guard Recovery Detection Time0.01-9.99s, can be displayedRecovery time
8Circular Saw Switch Locking DeviceLock or release the switch by motor driving 
9Operation ButtonsStop and Start buttons on the panel for operator easily cut off or turn on the power 
 

Hot Products

Electric Iron Drop Test Equipment HJ0610 Standard: Clause 21.101 of IEC 60335-2-3 Household and ...
Drop tester technical parameter 1. Drop height (mm): 300-1500 2. Measured maximum weight (kg): 65 3. ...
Ball impact tester Small ball impact tester, also known as Wagner impact tester Conform to the ...
Tester For Resistance To Impact By Small-Diameter Ball SH-16 Standard: ISO4532 Vitreous and ...
ipx7 immersion test device 1. Volume: 1000L; 2. Box size: w800 × D500 × h1500mm; 3. Equipment ...
Multi function simulation dripping test chamber Multi function simulation dripping test box ...