Active Member
|
[China]
Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China
Contact name:iven
shanghai kerang technology co ltd |
|
|
Low-Temperature Impact Test Device HC9926
Standard:IEC60811-1-4 clause 8.5 , IEC60884-1 and VDE0620, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature.
Application:For assessing the impact resistance of electrical accessories at low temperature, it is also used to assess the impact resistance of wire and cable at low temperature.
Test sample:Electrical accessories, surface mounted installation box, screwed glands, cover cap, polyvinyl chloride insulating and sheathing materials of electric cables etc.
Feature:The apparatus shall be placed on a pad of sponge rubber about 40 mm thick and held in a refrigerator before and during the test.
Parameters:
| Parameters/Model | H9926 | H9926A |
| Working station | Single station | 3 working stations |
| Weight of the drop hammer g | 1000±2 and 100±1 | 100,200,300,400,500,600,750,1000,1250,1500(weight collocation is according to table 1 and table 2) |
| The height of the drop impact mm | 100 | 100 |
| Acier steel | Φ20,Bottom end arc:R300,100g | Φ20,Bottom end arc:R300,100g |
| Corresponding standards and applicable scope | IEC60884-1 clause 24.4,figure 27; IEC60884-1 clause 30.4,figure 42: | IEC60811-1-4:,IEC60811-1-14 |
| Release mode | Manual, mechanical release | Manual, mechanical release |
Table 1:For the samples of laying of cable, the weight of the drop hammer required are as follows:
| The external diameter of the samples(D/mm) | The weight of the drop hammer /g | |
| ＞ | ＜or ≤ | |
| - | 4.0 | 100 |
| 4.0 | 6.0 | 200 |
| 6.0 | 9.0 | 300 |
| 9.0 | 12.5 | 400 |
| 12.5 | 20.0 | 500 |
| 20.0 | 30.0 | 750 |
| 30.0 | 50.0 | 1000 |
| 50.0 | 75.0 | 1250 |
| 75.0 | - | 1500 |
Table 2:For the samples of flexible cable and telecommunication cable, the weight of the drop hammer required is as follows:
| The external diameter of the sample D/mm | The weight of drop hammer /g | |
| ＞ | ＜or ≤ | |
| For flat flexible cord | 100 | |
| - | 6.0 | 100 |
| 6.0 | 10.0 | 200 |
| 10.0 | 15.0 | 300 |
| 15.0 | 25.0 | 400 |
| 25.0 | 35.0 | 500 |
| 35.0 | - | 600 |
About Us
We have a clean and tidy, wide workshop and a production and development team with rich experience, providing strong support for your r&d and production needs! All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Continuous improvement, seeking higher quality level. Our highly dedicated sales staff has never shied away from going that extra mile to meet and exceed the customer’s expectations. We treat our customers with the same loyalty and devotion, no matter the size of their business or industry.
Our Service
7X24-hour Telephone Consulting Service is available.
Reply and solution will be provided in 8 hours upon customer’s service request.
After-sales Support is available on a 7X24-hour basis, leaving no worries for customers.
Quality inspection from raw material to production, and delivery.
Professional quality control person, to avoid the unqualified products flowing to customer.
Strict inspection to Raw material, production, and delivery.
Full series of equipment in quality laboratory.
