Stainless Steel Impact Testing Machine Spring Operated Impact Hammers

Spring Operated Impact Hammers

Standard: IEC 60068-2-63, IEC 60068-2-75 test Ehb, IEC 60335-1, IEC 60598-1, IEC 60950, and IEC 60065

Application: This device is intended to test the impact resistance to shell, operating arm, handle, knob, indicator lights and shades of electrical appliance for household or similar purpose, to verify the safety performance and strength of the product.

Test sample: Shell, operating arm, handle, knob, indicator lights and shades

Feature:

1. The impact hammer is composed of three parts:

A. Shell. Includes housing, impact element guide and release mechanism, and parts fixed on these parts.

B. Impact element. Including the hammer, hammer tail and firing handle.

C. Release cone.

2. Working principle

The hammer generate impact energy by the mass and movement of impact element. When pulling the operating handle, release claw stop at the impact element release point, the hammer spring is pressed, when the compression quantity is different, the spring will release the different energy. For multi energy impact hammer, rotate the end cover to select corresponding impact energy. The impact energy was calibrated on calibration facility before delivery.

Parameters:

Our Service

7X24-hour Telephone Consulting Service is available.

Reply and solution will be provided in 8 hours upon customer’s service request.

After-sales Support is available on a 7X24-hour basis, leaving no worries for customers.

Quality inspection from raw material to production, and delivery.

Professional quality control person, to avoid the unqualified products flowing to customer.

Strict inspection to Raw material, production, and delivery.

Full series of equipment in quality laboratory.