Active Member
|
[China]
Address: Room A-109, No. 54, Shunren Road, Shunyi Dist,Beijing, China 101300
Contact name:Wendy Lee
Beijing Samyon Instruments Co., Ltd. |
|
|
NDT Test Equipment Rebar Location System To Test Rebar Diameter, Distribution, Coating Thickness In Concrete.
NDT Test Equipment Rebar Location System Use Lemo Connector Clip
SYR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete.
NDT Test Equipment Rebar Location System Specification
<Technical specification for test of reinforcing steel bar in
concrete> JGJ/T152-2008
NDT Test Equipment Rebar Location System Performance
Longer service life of the Connector Clip: The instrument has long
service life because of using Lemo Connector Clip which comes from
Swiss and uses for aircraft industry.
Good quality of signal cable: The signal cable has long service
life because of its flexible and substance.
High precision and stability: The instrument can locate the
steel-bar accurately and quickly.
Longer service life of the sensor: Improve the service life by
paste abrasion resistance allowance bottom of the sensor
Single sensor: No-change sensor in test, switching between high and
low test range can assure the precision of test data and the test
depth.
Display test information real-time: Display the test data directly
to avoid man-made errors.
Grid and section scan mode: Instrument can display steel bar
distribution and scan steel bar without concrete boundary limited.
Three-wheel steel-bar scan system: The system can assure scan path
along line and the precision of test data.
Powerful Windows data process and analysis software: Software can
display analysis result by diagram. Test data can be export to word
or Excel easily.
NDT Test Equipment Rebar Location System Picture:
Technical Data
| Applicable rebar diameter | 6mm~50mm | ||
| Tested range of concrete coating thickness | Low range: 6mm~90mm; High range: 7mm~190mm | ||
| Permissible error | Low range | High range | |
| ±1 | 6~59 | 7~79 | |
| ±2 | 60~69 | 80~119 | |
| ±4 | 70~90 | 120~190 | |
| Tested range of rebar diameter | 6mm~50mm | ||
| Permissible error of rebar diameter test | ±1 grade | ||
| Applicable environmental | Temperature: -10ºC~+40ºC; Dampness: <90%RH EMI: no Strong electromagnetic field | ||
| Power supply | 6 dry cells, work more than 30 times | ||
