|
[China]
Trade Verify
Address: Suolide International Science and Technology Park, Wuxi, Jiangsu
Contact name:Andrew
Serve Real Laboratory Co |
|
Verified Suppliers
|
|
|
Stable Temperature Control Automatic Heating Treatment 1400℃ Vacuum Tube Furnace
Product Description
The tube furnace series products are mainly aimed at heat treatment of samples in vacuum or protective atmosphere, high-quality furnace materials and stable temperature control system, which can ensure the reliability of experimental data; The product adopts the new ceramic fiber material as the furnace material, the furnace tube material is excellent, the two ends of the furnace tube are sealed with stainless steel flange, which can work under vacuum, the flange has an air inlet and an air outlet, which can pass into the protective gas, and the precision needle valve can adjust the air inlet flow.
Product features
1.The integrated design optimizes the furnace structure and saves space
2.Furnace material selection of polycrystalline mullet fiber material, high temperature deformation, good insulation performance
3.Double shell construction, equipped with air cooling system, shell temperature at room temperature +10℃
4.Intelligent PID control instrument, 30 sections of programmable program, can curve heating and set the temperature rate, constant temperature time control, automatic shutdown, etc
5.High temperature control accuracy, self-test accuracy within 1000 degrees ±0.1 ° C; ±1℃ above 1000 ° C
6. Equipped with door opening, power outage, over temperature alarm, leakage protection, over temperature protection
7.Optional large screen paperless recorder to achieve real-time recording of the temperature curve, and with a memory card to analyze and print the experimental data
Technical parameter
| Model | MLG-305-14 | MLG-306-14 | MLG-308-14 | MLG-310-14 | MLG-312-14 | MLG-315-14 | ||
| Performance | Quartz Tube Size | Φ50*1000mm | Φ60*1000mm | Φ80*1000mm | Φ100*1000mm | Φ120*1000mm | Φ150*1000mm | |
| Temperature control range | Room temperature -1400℃ | |||||||
| Operating temperature | ≤1300℃ | |||||||
| Heating zone size | 300mm | |||||||
| Temperature control accuracy | ＜1000 ±0.1℃ ； ≥1000±1℃ | |||||||
| Rate of heating | Recommended below 1000 degrees ≤10℃/min, the fastest heating rate ≤30℃/min | |||||||
| Rate of cooling | Above 700℃ ≤10℃/min | |||||||
| Furnace surface temperature | The surface temperature of the furnace body is less than room temperature +10 (the measuring point is 1000℃) | |||||||
| Composition | Outer packing | Cold rolled steel plate, surface resistance coating | ||||||
| Furnace body | Ceramic fiber furnace
| |||||||
| sensor | S-type thermocouple | |||||||
| Heating element | High quality silicon carbide rods
| |||||||
| Heating furnace tube | Corundum tube (length: 1000 mm)
| |||||||
| Cooling vane | Axial fan | |||||||
| Furnace structure | Double shell structure, equipped with air cooling system | |||||||
| controller | Control mode | PID control | ||||||
| Set representation | Digital setting/digital display | |||||||
| Overtemperature protection | Integrated controller type | |||||||
| Overtemperature setting | Numeric setting | |||||||
| Operation function | Custom run/program run (30 sections of program temperature control) | |||||||
| Additional function | Deviation correction, power failure compensation, lock key function | |||||||
| Timer | 1 min-99 hours 59 min and 999 hours 50 min digital setting, automatic operation, fast automatic stop | |||||||
| Vacuum system | Vacuum degree | 1.Optional mechanical pump, up to 10-2 pa
2.Equipped with our company (mechanical pump and molecular pump) combination high vacuum system, the power can reach 1.33 * 10-4 pa (empty furnace state)
| ||||||
| Thermal insulation pipe plug | 2 pieces of alumina material | |||||||
| Vacuum column | Stainless steel vacuum flange | |||||||
| Pressure gauge | -0.1 to 0.15mpa | |||||||
| Security | Working environment | RT±5-40℃ | ||||||
| Security of use | Open the door power off function, over temperature alarm function, leakage protection function, over temperature protection function | |||||||
| Specification | Furnace structure | Horizontal type | ||||||
| Power supply voltage | 220V50HZ | |||||||
| Input power | 4KW | 4KW | 4KW | 4KW | 4KW | 4KW | ||
| Equipment size(D*W*H) | 350*960*800mm | 350*960*800mm | 350*960*800mm | 350*960*900mm | 400*960*900mm | 350*960*1000mm | ||
| Weight(KG) | 30 | 40 | 40 | 50 | 50 | 50 | ||
About us
We are professional manufacturer & supplier specialized in Civil Engineering, Material testing, Lab equipments since 2003. We can manufacture & Supply various kinds of testing equipments under standards of ASTM/AASHTO, ISO, EN, DIN, BS, JIS, as well as other specialized industry standards. Our customers have spreaded to over 90 countries & areas since company established.
Our advantages
With our strong background and over 20 years rich experience in the materials test equipment industry, we can know more about our customers requirements and give our more professional advises, thus the presales communications will be easier and faster, so that can improve working efficiency of our valued customer.
Our business philosophy is long termism and focus, so we value product quality more, we will not cut corners in manufacturing, in every delivery, we hope our customer will be satisfied with the product quality.
Our regulations for after-sales service: fast response, friendly attitude, No excuses, must be settled
Similar Product
