Home Companies SHENZHEN KXIND COMMUNICATIONS CO.,LTD

KEXINT GYFTY83 Outdoor Anti-bird Pecking Rat-proof Non-metal Central Strengthen FRP Optical Fiber Cable

Contact Us

[China]

Trade Verify

Address: 5th Floor, Building 2, Chunhu Industrial Zone, Pinghu, Dongshen Road, Longgang District, Shenzhen, Guangdong, China

Contact name:Steve

SHENZHEN KXIND COMMUNICATIONS CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

KEXINT GYFTY83 Outdoor Anti-bird Pecking Rat-proof Non-metal Central Strengthen FRP Optical Fiber Cable

Country/Region	china
City & Province	shenzhen guangdong
Categories	Power Cables

Product Details

GYFTY83 fiber optic cable is designed by physical and chemical
anti-rodent methods. The optical fiber is installed in the loose
tube and twisted around the central strength member. The gap of the
cable core is filled with water-blocking ointment. Combine the
aramid yarn for reinforcement, finally add PE outer sheath, extrude
PE sheath inside, and use flat FRP for armor, and finally extrude
PE outer sheath
 
GYFTY83 optical cable is a full-dielectric non-metallic structure,
using high-strength glass fiber reinforced plastics to form an
extremely effective anti-rodent and anti-squirrel protective layer,
and through structural optimization, the miniaturization of the
optical fiber cable core and the heavy-duty anti-rodent layer are
achieved, effectively ensuring Anti-rodent, anti-squirrel
performance.

 
Application:
 
1. The optical cable is suitable for direct burial laying
 
2. Non-self-supporting overhead, pipeline
 
Features:
 
1. Precise fiber excess length control ensures that the cable has
excellent tensile and temperature performance
 
2. The loose tube material has good hydrolysis resistance, and the
tube is filled with ointment to protect the optical fiber
 
3. The sheath material has good anti-solar radiation performance
 
4. The double-layer sheath makes the cable have excellent
compression resistance
 
5. All-dielectric optical cable, especially suitable for areas
around electric fields or lightning-prone areas

Structure		Unit	Parameter
Fiber count		fibers	6~24
Loose tube Diameter		mm	Ф1.8~2.0
Cores of per tube (no more than)		--	6
Central strength member diameter(FRP)		mm	2.0
Element		--	5
FRP			1.6*19
Cable diameter		mm	15.7±0.5
Weight		Kg/km	249
wooden drum 2km		mm	1300760500(DdL)
Tensile strength	Long term	N	4500
	Short term	N	8800
Crush Resistance	Long term	N	2200
	Short term	N	3000
Bending Radius	Dynamic	mm	≥25*OD
	Static	mm	≥12.5*OD
Operating Temperature		℃	-40 --- +60

 
Test requirements:

No	Item	Test standard	Method	Details specification
1	Tensile test	IEC-60794-1-E1	-Max. Tensile strength:5000N -Sample length:50 meters -Time: 1minutes	-Fiber strain at maximum Load: max. 0.33% -Attenuation increase<0.10dB, -Reversible
2	Crush test	IEC-60794-1-E3	-Load: 3000N/100mm -Time: 1 minutes -Number of tests: 3	-No splits or cracks in the outer jacket; -Attenuation increase<0.10dB, -Reversible
3	Impact test	IEC-60794-1-E4	-Impact energy:1kg - Height:1 meter -Impact points: 5 --Number of impacts: 5	-No splits or cracks in the outer jacket -Attenuation increase≤0.10dB -Reversible
4	Repeated bending	IEC-60794-1-E6	-1m cable length with 250N weight, 30 cycles	-No damage to the outer jacket -Attenuation increase ≤0.10dB -Reversible
5	Torsion test	IEC-60794-1-E7	-1m cable length with 250N weight ±90 degrees -Time:10 cycles	-No damage to the outer jacket -Attenuation increase ≤0.10dB -Reversible
6	Bending test	IEC-60794-1-E11	-Diameter of mandrel: 25×D -Number of turns/helix:10 -Number of cycles: 5	-No damage to the outer jacket - No fiber break -Reversible
7	Temperature cycling test	IEC-60794-1-F1	-Temperature step: +20℃→-40℃→+60℃→-40℃→ +60℃→+20℃ -Time per each step: 24 hrs -Number of cycles: 2 cycles	-Attenuation variation for reference value(the attenuation to be measured before test at +20±3℃) ≤0.05dB/km, -Reversible
8	Water penetration test	IEC-60794-1-F5	-Water height: 1m, -Sample length:3m, -Duration of test: 24hrs	-No water leakage at the end of the sample
9	Drip test	IEC-60794-1-E14	-Five 0.3m samples suspended vertically in a climate chamber, raised temperature to +70℃	-No filling compound shall drip from tubes after 24 hr

Packaging and drum:1. The cable is wound on a non-returnable wooden drum. Both ends of
cable are securely fastened to drum and sealed with a shrinkable
cap. The following information shall be marked on the outer sheath
of the cable at an interval of about 1 meter. -Cable designation
-Number of optical fiber -Manufacture name -Month/Year of
Manufacture -Cable length The sequential number of the cable length
shall be marked on the outer sheath of the cable at an interval of
1meter ± 1%.
2. Drum marking Each side of every wooden drum shall be permanently marked in a
minimum of 3 cm high lettering with following: -Manufacture name -
Cable length - Number of fibers - Cable segment number - Inspection
stamp and date 3. Packing and shipping The both end of each cable shall be sealed with suitable caps to
prevent ingress of moisture. The factory length of the cable shall
be wound on a strong wooden drum.

Hot Products

KEXINT Fiber Optic Modular MPO MTP Cassette 12 Fiber LC UPC Single Mode ABS Shell

The KXT-12LC cassette is specially designed to optimize fiber optic cable management, plug and play, ...

12 Cores Fiber Optic Trunk Cable Om4 Mtp/Pc Male - Lc/Upc Fanout 0.9mm 40cm

MPO/MTP ribbon and trunk mulitcore cable assemblies facilitate rapid deployment of high density ...

KEXINT MTP (MPO) Female APC To MDC 16 Fiber Breakout OM4 (50/125) Fiber Optic Patch Cord

US Conec's ELiMENT® MDC connector is a Very Small Form Factor (VSFF) duplex optical connector and is ...

KEXINT MTP (MPO) Female APC To MDC 16 Fiber Breakout Single Mode (9/125) Fiber Optic Patch Cord

KEXINT MTP (MPO) Female APC To MDC 16 Fiber Breakout Single Mode (9/125) Fiber Optic Patch Cord US ...

Single Mode G657A2 Fiber Optic Patch Cord 36 Cores Yellow Color With Push Pull

Fiber Optic Patch Cable is also known as fiber optic jumper or fiber optic patch cord. Fiber Optic ...

Yellow 8 Core MPO MTP to 4 LC Duplex SM Fiber Optic Patch Cord KEXINT FTTH / FTTX

Fiber Optic Patch Cord KEXINT FTTH/FTTX Yellow 8 Core MPO MTP to 4 LC Duplex SM 3.0mm 2.0mmBreakout ...

Related Products