Home Companies SHENZHEN KXIND COMMUNICATIONS CO.,LTD

1 Usb 10W 1GE 3FE Xpon Gepon Onu Wifi Catv Home Gateway Unit

SHENZHEN KXIND COMMUNICATIONS CO.,LTD

Contact Us

[China] country

Trade Verify

Address: 5th Floor, Building 2, Chunhu Industrial Zone, Pinghu, Dongshen Road, Longgang District, Shenzhen, Guangdong, China

Contact name:Steve

Inquir Now

SHENZHEN KXIND COMMUNICATIONS CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

1 Usb 10W 1GE 3FE Xpon Gepon Onu Wifi Catv Home Gateway Unit

Country/Region china
City & Province shenzhen guangdong
Categories Dimmers
InquireNow

Product Details

Xpon Gepon Onu 1 Usb 1ge 3fe 1pots Wifi Catv Home Gateway Unit
 

Product Overview.

       

1. It is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access.

2. It is based on mature and stable, cost-effective XPON technology.

3. It adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X

 

Product Descriptions:

  • Support EPON/GPON mode and switch mode automatically
  • Support Route mode for PPPoE/IPoE/Static IP and Bridge mode
  • Support IPv4 and IPv6 Dual mode
  • Support 2.4G WIFI and 2*2 MIMO
  • Support CATV interface for Video Service and remote control by Major OLT
  • Support LAN IP and DHCP Server configuration
  • Support Port Mapping and Loop-Detect
  • Support Firewall function and ACL function
  • Support IGMP Snooping/Proxy multicast feature
  • Support TR069 remote configuration and maintenance

 

 

 

Hardware Specification:

       

Technical itemDetails
PON Interface1 GPON BOB (Class B+/Class C+)
Receiving sensitivity: ≤-27dBm/≤-29dBm
Transmitting optical power: +0.5~+5dBm/+2~+7dBm
Transmission distance: 20KM
WavelengthTX: 1310nm, RX: 1490nm
Optical InterfaceSC/APC Connector
Design SchemeRTL9603C+RTL8192FR BOB(i7525BN)
Chip SpecCPU 950MHz,DDR2 128MB
FlashSPI Nor Flash 16MB
LAN Interface1 x 10/100/1000Mbps(GE) and 3 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
WirelessCompliant with IEEE802.11b/g/n,
Operating frequency: 2.400-2.4835GHz
support MIMO, rate up to 300Mbps,
2T2R,2 external antenna 5dBi,
Support: Multiple SSID
Channel: Auto
Modulation type: DSSS, CCK and OFDM
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
CATV InterfaceRF, WDM, optical power : +2~-15dBm
Optical reflection loss: ≥45dB
Optical receiving wavelength: 1550±10nm
RF frequency range: 47~1000MHz, RF output impedance: 75Ω
RF output level: 78dBuV
AGC range: -13~+1dBm
MER: ≥32dB@-15dBm
LED11 LED, For Status of WIFI,WPS,PWR,LOS,PON,LAN1~LAN4, Worn, Normal(CATV)
Push-Button3,For Function of Reset, WLAN, WPS
Operating ConditionTemperature: 0℃~+50℃
Humidity: 10%~90%(non-condensing)
Storing ConditionTemperature: -30℃~+60℃
Humidity: 10%~90%(non-condensing)
Power SupplyDC 12V/1A
Power Consumption≤6W
Dimension180mm×107mm×28mm(L×W×H)
Net Weight0.2Kg
 

 

 

 

Panel lights Introduction:

Pilot LampStatusDescription
WIFIOnThe WIFI interface is up.
BlinkThe WIFI interface is sending or/and receiving data (ACT).
OffThe WIFI interface is down.
WPSBlinkThe WIFI interface is securely establishing a connection.
OffThe WIFI interface does not establish a secure connection.
PWROnThe device is powered up.
OffThe device is powered down.
LOSBlinkThe device doses not receive optical signals or with low signals.
OffThe device has received optical signal.
PONOnThe device has registered to the PON system.
BlinkThe device is registering the PON system.
OffThe device registration is incorrect.
LAN1~LAN4OnPort (LANx) is connected properly (LINK).
BlinkPort (LANx) is sending or/and receiving data (ACT).
OffPort (LANx) connection exception or not connected.

Worn

(CATV)

OnInput optical power is higher than 3dbm or lower than -15dbm
OffInput optical power is between -15dbm and 3dbm

Normal

(CATV)

OnInput optical power is between -15dbm and 3dbm
OffInput optical power is higher than 3dbm or lower than -15dbm
 

POTS Service Functions

1) Call protocol: SIP (IMS compatible), seamless compatible with all popular call agent.

2) Integrate heartbeat function and support active/standby call agent.

3) Voice coding: ITU-T G.711/G.723.1(5.3K/6.3Kbit/s)/G.729, auto-negotiate with call agent.

4) Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128ms tail length.

5) Support high/low speed fax/Modem, bypass fax, and T38 fax.

6) Support RFC2833 and redundant RFC2833, difference rings, MD5 authentication, call forward, call waiting, hot-line call, alarm clock, and all kinds of value-added voice service.

7) Multi-party conferencing.

8) Line testing according to GR-909.

9) IP address assignment: dynamic PPPoE/DHCP Client and static IP.

10) Support WEB, CLI, TR069.

11) Integrated OAM, XML, DHCP option 66 & 67 for auto configuration and firmware upgrade.

12) Call loss is less than 0.01%.

 

 
Application chart



Our advantages:
1. Good reply: Your inquiry related to our products or price will be replied within 24 hours.
2. OEM&ODM: We can help you to design or put your logo and company name into products.
3. Remote Technical support&Full Technical Document
4. Warranty: 1 year warranty( While the warranty is not responsible for those broken by violence or updated with other brands.)
5. English software, English Indicator
6. Professional, Very competitive price
7. Large Stock, Fast Delivery
8. Quality Assurance
 

 

 

 

Hot Products

Description: An mpo fiber optic connectors terminates the end of an optical fiber, and enables ...
OM3 24 MTP MPO Fiber Optical Patch Cord 3M 24 Core type B SENKO Water Blue Our strength: The ...
100G 24 MTP MPO Fiber Optical Patch Cord 3M OM4 24 Core Magenta type B USCONEC Our strength: MPO / ...
The KXT-12LC cassette is specially designed to optimize fiber optic cable management, plug and play, ...
MPO/MTP ribbon and trunk mulitcore cable assemblies facilitate rapid deployment of high density ...
US Conec's ELiMENT® MDC connector is a Very Small Form Factor (VSFF) duplex optical connector and is ...