Home Companies SHENZHEN KXIND COMMUNICATIONS CO.,LTD

SC APC Fiber Optic Quick Connector Single Mode FTTH Tool 0.2dB Insertion Loss

Contact Us

[China]

Trade Verify

Address: 5th Floor, Building 2, Chunhu Industrial Zone, Pinghu, Dongshen Road, Longgang District, Shenzhen, Guangdong, China

Contact name:Steve

SHENZHEN KXIND COMMUNICATIONS CO.,LTD

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SC APC Fiber Optic Quick Connector Single Mode FTTH Tool 0.2dB Insertion Loss

Country/Region	china
City & Province	shenzhen guangdong
Categories	Radio & TV Broadcasting Equipment

Product Details

Crimp ceramic V Slot SC APC Fiber Optic Quick Single Mode FTTH Tool Cold Fast Connector 53mm

Quick Assembly Connector (also named “ No-Polish Connector ” , “Pre-polish Connector” or “ Fast Connector ”) is an easy-to-install device. No tool or jig is required. It is universal for 250um /900um / 2.0mm / 3.0mm / Flat Cable.

it was designed for fast termination with pre-polished connector. Using V groove technology, it requires no epoxy. With transparent body, the connecting result can be seen by Fiber Checker immediately. This is an ideal solution, either for outside plant or inside a building.

Optic Fiber Fast Connector

1. Simple structure

2. Save time

3. Low insertion loss.

Feature

1. Based on the pluggable non-preset tube technology

2. Precision ceramic components with co-axial self centering, Excellent and durable optical property

3. Optical fiber fits axially in elastic way and avoids completely any false connect

4. Triple clamping through the naked fiber, tight buffer and cable, etc., can be used as patchcord

5. High on-line tensile strength of Optical Fast Connector after terminating, always keep connecting under the force from cabling and drawing.

6. Integrated protection of the casing to withstand harsh user environment.

7. Directly connectable with ONU without any optical socket, which reduces FTTH cost.

8. High success rate and easiness in installation with average splicing time 100 sec

9. Lower requirement for the habit working and work environment call for to the builder.

10. Visible Installation quality; independent from any far end light source and special device satisfying cabling construction in any sectioned way.

Specification

ITEM	Technical Parameters
Applicable for	3.1 x 2.0 mm Drop cable
Optical fiber diameter	125μm ( 657A & 657B )
Tight buffer diameter	250μm
Fiber mode	Single mode
Operation time	About 100s(no fiber cut)
Insert loss	≤ 0.3dB(1310nm & 1550nm)
Return loss	≥40dB
Fastening strength of naked fiber	>5 N
Fastening strength of naked fiber holder	>10 N
Tensile strength	>50 N
Using temperature	-40~+80°C
On-line tensile strength (20 N)	IL ≤ 0.2dB RL ≤ 5dB
Mechanical durability (500 times)	IL ≤ 0.2dB RL ≤ 5dB
Drop-off test (drop-off height 4m, once per direction, totally 3 times)	IL ≤ 0.2dB RL ≤ 5dB