|
[China]
Trade Verify
Address: 5th Floor, Building 2, Chunhu Industrial Zone, Pinghu, Dongshen Road, Longgang District, Shenzhen, Guangdong, China
Contact name:Steve
SHENZHEN KXIND COMMUNICATIONS CO.,LTD |
|
Verified Suppliers
|
|
|
Black 4.0 FTTH Drop Cable Fiber Optic Patch Cord With 2.0 Connector SC/APC 20m 50M
1.Product Description:
A fiber optic patch cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, the terminal box,and ONU. FTTH drop cable patch cord are used for linking the equipment and components in the fiber optic network. This GJXFJPH drop cable is internal and external double sheath, has strong moisture and water resistance. And has UV resistance.The fiber is G657A1 or G652D, the material of jacket is LSZH, the cable can be laid by aerial or duct. we can provide 25m 50m 75m 100m 125m 150m length drop cable patch cord.
2.Product Construction:
3. Applications:
Local Area Network (LAN)
Data communication network
Telecommunication optical transmission network
Optical access network(OAN)
Active device termination
Fiber optics data transmission
Test Equipment and CATV
Gigabit Ethernet
4. Cable type: GJXFH-1B6a2
4.1. Profile view:
4.2. Technology specification
| Technology specification Item | Technology parameter |
| Cable type | GJXFJPH-1~4B6a2 |
| Tight buffer color | Blue, orange, green, brown |
| Tight buffer diameter mm | 0.85±0.05 |
| Fiber type | 9/125(G657A2) |
| Strength member | Aramid yarns |
| Jacket thickness mm | 0.80±0.10 |
| Internal sub-cable Jacket color | White |
| Cable outer sheath color | Black (PANTONE 136C, ΔE≤4) |
| Jacket material | LSZH |
| Internal sub-cable | 2.0(±0.1) |
| Cable diameter mm | 4.0 (±0.2) |
| Cable weight Kg/km | 15.0 |
| Min. bending radius mm | 10D |
| Attenuation dB/km | ≦ 0.4at 1310nm, ≦ 0.3 at 1550nm |
| Short tension N | 200 |
| Short crush N/100mm | 1000 |
| Operation temperature ℃ | -40~+70 |
| Installation temperature ℃ | -5~+60 |
| Transportation and storage temperature ℃ | -40~+70 |
Note: the product is accord with the instruction of EU RoHS.
5. Optical Cable Color
| G652D/G657A | OM2 | OM3 | OM4 | Armored Cables |
| Black or White | Orange or Black | Aqua or Black | Magenta or Black | Blue or Black |
6. Connector Specification
6.1 General Requirements
| Specification | Unit | SC, FC, LC | ST, MU, MT-RJ,SMA | MTP,MPO | E2000 | |||||
| Single-mode | Multimode | Single-mode | Multimode | Multimode | Single-mode | Single-mode | ||||
| UPC | APC | PC | UPC | PC | PC | APC | UPC | APC | ||
| Insertion loss | dB | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.7 | ≤0.75 | ≤0.3 | ≤0.3 |
| Return loss | dB | ≥50 | ≥60 | ≥30 | ≥50 | ≥30 | ≥25 | ≥45 | ≥55 | ≥75 |
| Wavelength | nm | 1310/1510 | 1310/1510 | 1310/1510 | 1310/1510 | |||||
| Interchangeability | dB | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.2 | |||||
| Vibration | dB | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.2 | |||||
| Operating temperature | ℃ | -40~75 | -40~75 | -40~75 | -40~75 | |||||
| Storage temperature | ℃ | -45~85 | -45~85 | -45~85 | -45~85 | |||||
| Cable diameter | mm | φ3.0,φ2.0,φ0.9 | φ3.0,φ2.0,φ0.9 | φ3.0,φ2.0,φ0.9 | φ3.0,φ2.0,φ0.9 | |||||
6.2 Special Designation
| Type | Standard,Master |
| Style | LC,SC,ST,FC.MU,DIN,D4,MPO, SC/APC,FC/APC,LC/APC.MU/APC |
| Fiber | Singlemode/Multimode |
| 50/125, 62.5/125 (Multimode) OM2&OM1 | |
| 50/125, 10G (Multimode) OM3 | |
| Cable | Simplex, Duplex |
| Φ3.0mm, Φ2.0mm, Φ0.9mm | |
| PVC or LSZH | |
| Polishing Manner | UPC,SPC,APC (8°& 6°) |
| Insertion Loss | ≤ 0.1dB (For Singlemode Master) |
| ≤ 0.25dB (For Singlemode Standard) | |
| ≤ 0.25dB (For Multimode) | |
| Tested by JDS | |
| Return Loss (Singlemode) | UPC ≥ 50dB |
| SPC ≥ 55dB | |
| APC ≥ 60dB (typ.65dB) | |
| Tested by JDS | |
| Repeatability | ±0.1dB |
| Operating temperature | -400C to 850C |
| Geometry Requirement ( Singlemode) | Ferrule Endface Radius |
| 7mm ≤ R ≤ 12mm (For APC) | |
| 10mm ≤ R ≤ 25mm (For Standard) | |
| Apex Offset ≤ 30 μm (For Master) | |
| Apex Offset ≤ 50 μm (For Standard) | |
| Undercut -50nm ≤ U ≤ 50nm | |
| Tested by DORC | |
| Geometry Requirement ( Singlemode) | Ferrule Endface Radius |
| 7mm ≤ R ≤ 12mm (For APC) | |
| 10mm ≤ R ≤ 25mm (For Standard) | |
| Apex Offset ≤ 30 μm (For Master) | |
| Apex Offset ≤ 50 μm (For Standard) | |
| Undercut -50nm ≤ U ≤ 50nm | |
| Tested by DORC |
7. Color of connector
8.Environmentally
The product is accord with the instruction of EU ROHS
