Kevlar MM SM Fiber Optic Cable Indoor Outdoor 7.0 Mm SOS PDLC ODVA DLC

Outdoor Fiber Optic NO Armoured 7.0 mm  Cable Remote Radio Head Cell Tower

      Because the BBU+RRU mode is generally used in short-distance and indoor coverage scenarios, optical cables must pass through corridors, indoor wiring ducts, shafts, etc., and air blowing may be used in some places, so this type is different from ordinary optical cables. In the category of special light, the optical cable generally requires light weight, small outer diameter, small bending radius, dry structure, flame retardant and tensile strength. We generally refer to this type of fiber optic cable as a cable, consisting of a single-core soft cable, aramid armor and a low-smoke halogen-free jacket.

         In order to reduce the diameter of the cable, the cable is generally tightly sheathed, and the tensile and anti-pressure performance of the fiber can be further improved, and the end connector can be processed easily with the quick connector. The reinforcing member is made of aramid yarn, which can improve the cable. Short-term tensile strength and flexibility, considering that the cable is used indoors, the sheath is made of LZSH sheathing material. At the same time, it can be considered to add water-blocking yarn when placing the aramid yarn, which can effectively avoid the appearance of the cable. The possibility of seepage.

Features:

1. Excellent mechanical and enviormental performance

2. Good water resistance performance

3. Easy to install

4.Excellent stripping performance

5. Suited to SM fiber and MM fiber (50/125μm and 62.5/125μm)

6.Excellent temperature performance

7.Fiber count: 2~24

8.Buffer material: PVC,LSZH,Hytrel,NYLON,PVDF

Applications:

Adopted to indoor distribution

As pigtail of communication equipment

Suitable for communication equipment served

Can be installed conveniently and operated simply

Suitable for floor connection

Fiber Cable Parameters:

Order requirement:

1. Fiber Type: G.652, G.655 or G.657 single-mode fiber, A1a or A1b, OM3 or OM4 multi-mode fiber, or other types of fiber

2. Fiber Count: Total number of fibers in the cable

3. Jacket Material: PVC, LSZH, ZRPO, TPU or other contacted material

4. Jacket Color: (Including color of fiber) meets the requirements of relevant standards, or other contacted color

5. Cable Dimension: The nominal cable dimension, or other contracted dimension

6. Delivery Length: 1km or 2km, or other contracted length

7. Other Requirements: Other contracted special requests

Packing:

    a Nominal shipping length of the cable will be 1~3 km. Other length is also available if required by buyer.

    b Each length of the cable will be wound on a separate strong wooden.

    c Both ends of the cable will be sealed with a suitable heat shrinkable cap to prevent the entry of moisture during transportation and storage.

    d The cable end will be securely fastened to the drum to prevent the cable from coming loose during transit or becoming loose during placing operations.

    e  Circumference battens will be secured between the outer edges of the flange to protect the cable against damage during shipment and storage.

    f  For testing purposes, the inner end of the cable will be recessed into a slot in the drum flange . A minimum length of one meter of cable at the inner end will be accessible.

    g The cable will be shipped on drums designed to prevent damage to the cable during shipment and installation

    h The minimum barrel diameter of the drum will be 30 times to the overall cable diameter.