Home Companies SHENZHEN KXIND COMMUNICATIONS CO.,LTD

Ftth Xpon Ont 1ge + 3 Fe + 1 Wifi 2.4g 5g Dual Channel + 1 Ports + 2 Usb + 1 Power

SHENZHEN KXIND COMMUNICATIONS CO.,LTD

Contact Us

[China] country

Trade Verify

Address: 5th Floor, Building 2, Chunhu Industrial Zone, Pinghu, Dongshen Road, Longgang District, Shenzhen, Guangdong, China

Contact name:Steve

Inquir Now

SHENZHEN KXIND COMMUNICATIONS CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Ftth Xpon Ont 1ge + 3 Fe + 1 Wifi 2.4g 5g Dual Channel + 1 Ports + 2 Usb + 1 Power

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

COMELINK XP515 GEPON ONU is our latest product which offer: 1GE interface,3 FE interfaces, 1 WIFI interface interface. It’s suitable for home and small enterprises use and well fit for FTTH high speed data transfer.It fully comply with IEEE 802.3-2005 and ITU-T G.984.x . It is operative, manageable and maintainable at telecommunication level, and can provide high speed data service for customers. It has a PON uplink port that connects to office end apparatus through optical fiber.
Data parameter
DDR
1200M
FLASH
2GB
Optical fiber interface
1 SC / APC fiber port
Ethernet interface
1 x 10 / 100 / 1000m adaptive port (RJ45)
3 x 10 / 100M adaptive ports (RJ45)
Telephone interface
1 2-core telephone port
Wireless WiFi
2 external antennas
IEEE 802.11b/g/n compliant
2.4GHz wireless network
IEEE 802.11a/n/ac compliant
5GHz wireless network
USB port
2 USB 2.0 port
Product features:
➤ Comply with ITU-T g.984 standard
➤ Comply with H.248, MGCP and SIP protocol standards
➤ Comply with 802.11 n / B / g protocol standard
➤ It supports layer 2 switching of Ethernet services and line speed forwarding of uplink and downlink services
➤ Support frame filtering and suppression
➤ Support the standard 802.1Q VLAN function and VLAN conversion
➤ 4094 VLANs supported
➤ Support dynamic bandwidth allocation
➤ Support PPPoE, ipoe, bridge and other services
➤ Support QoS, including service flow classification, priority marking, queuing and scheduling, traffic shaping and traffic
control
➤ Support IGMP proxy and IGMP snooping
➤ Support Ethernet port speed limit, loop detection and layer-2 isolation
➤ Support power failure alarm
➤ Support remote reset and restart functions
➤ Support the function of restoring factory parameters
➤ Support data encryption
➤ Support status detection and fault reporting
➤ Support power lightning protection
➤ support GPON / EPON dual mode


 
Port characteristics:
✦ PON: connect the OLT equipment at the source end through the optical fiber line
✦ Ethernet port: connected to user side equipment through twisted pair network cable, lan1 port speed is 10 / 100 / 1000m, adaptive, lan2-lan4 end Adaptive port rate of 10 / 100M
✦ Telephone port: connected to user side equipment through telephone line
✦ Reset button: restart the equipment; Press and hold for more than 3 seconds and the system will return to the factory default
✦ WiFi button: wireless routing function on / off
✦ WPS button: WPS is used to simplify Wi Fi wireless security settings and network management, that is, Wi Fi protection settings, which you can set according to the client Support and select the appropriate mode
✦ Led button: LED indicator on / off
✦ Power switch: power on / off
✦ Power interface: connected to external power supply


 
Optical properties:
♣ support wavelength division multiplexing technology, single fiber dual wave bidirectional transmission
♣ interface type: SC / APC
♣ maximum spectral ratio: 1:128
♣ rate: uplink 1.25gbps, downlink 2.5Gbps
♣ transmission wavelength: 1310 nm
♣ receiving wavelength: 1490 NM
♣ output optical power: - 1 ~ + 4dbm
♣ receiving sensitivity: < - 27dBm
♣ The longest distance between OLT and ONU is 20km


 
Physical properties:
♠ Power supply: 12V / 1A
♠ Operating temperature: - 5 ~ 55 ℃
♠ Storage temperature: - 40 ° ~ 70 °
♠ Chassis specification: 194 * 152 * 32 mm (L * w * h)

Hot Products

MPO/MTP ribbon and trunk mulitcore cable assemblies facilitate rapid deployment of high density ...
US Conec's ELiMENT® MDC connector is a Very Small Form Factor (VSFF) duplex optical connector and is ...
KEXINT MTP (MPO) Female APC To MDC 16 Fiber Breakout Single Mode (9/125) Fiber Optic Patch Cord US ...
The MDC patch cord uses US CONEC's ELiMEN™ MDC connector, which is a very small form factor (VSFF) ...
The MDC patch cord uses US CONEC's ELiMEN™ MDC connector, which is a very small form factor (VSFF) ...
US Conec's ELiMENT® MDC connector is a Very Small Form Factor (VSFF) duplex optical connector and is ...