Home Companies SHENZHEN KXIND COMMUNICATIONS CO.,LTD

2 In 2 Out IP68 Waterproof FTTH Fiber Optic Splice Closure Customizable Wall Mounting

SHENZHEN KXIND COMMUNICATIONS CO.,LTD

Contact Us

[China] country

Trade Verify

Address: 5th Floor, Building 2, Chunhu Industrial Zone, Pinghu, Dongshen Road, Longgang District, Shenzhen, Guangdong, China

Contact name:Steve

Inquir Now

SHENZHEN KXIND COMMUNICATIONS CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

2 In 2 Out IP68 Waterproof FTTH Fiber Optic Splice Closure Customizable Wall Mounting

Country/Region china
City & Province shenzhen guangdong
Categories Connectors
InquireNow

Product Details

 

 

Input/output Ports dia.2 Inputs 2 Outputs
Storage capacity (single fusion)256F
Splice tray8Trays (32 splices each tray)
Capacity256
Dimensions L (mm)x Φ555X290X106mm
Raw materialBase Material and High Strength Polycarbonate Case. Color:  light grey
Trays Polycarbonate + ABS. Black color
Cable Diameter (mm):Φ7-Φ22
ProtectionIP 68

 

 

Description:

It is a universal access junction box that allows the continuity and segregation of medium capacity optical cables used in the deployment of optical power networks and transport. The design of the box allows the mechanical continuity of the cable pulling elements and protects the fibers, the junctions, and optical devices facilitating the organization of splices and fiber surplus storage. The box is airtight and resistant to weather conditions by which can be installed both outdoors and indoors buildings in chambers of record, boxes, walls, posts, or cable galleries.

Features:
1.It has 4 independent cable accesses at one end. Each of them allows individualized entry into the less two medium-capacity multifiber cables (double inputs) and up to 6 small capacity optical cables (7mm.).
2.The closing cover is completely assembled and removed without the need for special tools thanks to the clip-type seal.
3.The sealing of access cables to the box is done by rubber gaskets with pre-cut entries.
4.Diameter inputs/outputs cables from 22 to 7 mm. Maximum 256 fusions of F.O (double layer).
5.Wide and easily accessible rectangular splice trays with extendable tabs for better fiber storage up to 32 F.O. (double layer).
6.Both the support block and the individual trays allow 90º turn and its interlocking in fixed positions to facilitate installation.
7.Operating temperature -25 to +70 ℃.
8.Degree of protection against mechanical impacts IK09 (20 J).
9.The box once closed is completely hermetic and resistant to weather conditions. Degree of protection IP-68.
10.The materials are designed for a minimum duration of 20 years.
11.It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by the network.

Hot Products

The KXT-12LC cassette is specially designed to optimize fiber optic cable management, plug and play, ...
MPO/MTP ribbon and trunk mulitcore cable assemblies facilitate rapid deployment of high density ...
US Conec's ELiMENT® MDC connector is a Very Small Form Factor (VSFF) duplex optical connector and is ...
KEXINT MTP (MPO) Female APC To MDC 16 Fiber Breakout Single Mode (9/125) Fiber Optic Patch Cord US ...
Fiber optic patch cord means that both ends of the optical cable are equipped with connector plugs ...
LC to LC With push pull-tab Duplex Uniboot Optical Patch Cord Designed to deliver maximum connectivi...