Home Companies Shenzhen Jiawei Hengxin ( Konnwei ) Technology Co.,Ltd

scanners automotriz OBD2 Car Scanner Konnwei KW808 LCD screen with Portuguese

Shenzhen Jiawei Hengxin ( Konnwei ) Technology Co.,Ltd
Active Member

Contact Us

[China] country

Address: No.319 Building A ,Business Center of QinYe , 6 road Xin’an , Bao’an Center No.82 district, Bao’an distric ,Shenzhen city , GD , China .

Contact name:Lisa Qin

Inquir Now

Shenzhen Jiawei Hengxin ( Konnwei ) Technology Co.,Ltd

scanners automotriz OBD2 Car Scanner Konnwei KW808 LCD screen with Portuguese

Country/Region china
City & Province shenzhen guangdong
Categories Scanners
InquireNow

Product Details

Konnwei KW808 Automotive tools OBD2 car scanner Diagnostic Tool

 

ProtocolOBD2 EOBD
FunctionReads, stores & playbacks live sensor data
Features 1Full OBD2 auto diagnostic scanner
Features 2Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Support protocols
ISO 9141
KWP2000
SAE J1850
CAN
J1850 VPW
 
Connection16PIN OBD connector

 

Main Features:

 

The KW808 OBDII/EOBD Code Reader supports all nine OBDII test modes on all OBDII EOBD compliant vehicles to enable technicians and home users to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use, this hand-held scanning tool enables fast and easy access to engine based EOBD Fault codes, The CAN enabled tool gives clear, concise DTC definitions on its large back-lit LCD screen retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes, Turns off MIL light, Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.

 


Works on all 1996 and later OBDII compliant US, European and Asian vehicles
Easily determines the cause of the Check Engine Light ( MIL)
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays DTC definitions on unit screen
Views freeze frame data
Displays monitor and I/M readiness status (emissions)
Identifies pending codes
Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports CAN (Controller Area Network) and all other current
OBD-II protocols
Built-in OBD-II DTC lookup library

Large easy-to-read backlit LCD screen
 

 

 
 
KONNWEI KW808 Languages
English, French, German, Dutch, Spanish
 
KW808 Vehicle Coverages
KW808 supports both diesel and gasoline vehicles, as long as the car is compliant with standard OBDII protocols, with OBDII 16pins Diagnostic Port. Reads & clears generic and some maunfactures trouble codes.
 
American (USA) car
for Standard OBD2 Cars from 1996 to Now:
for Chrysler, for Ford, for GM, for Jeep
 
European car
for Standard OBD2 Cars from 2003 to Now:
for Alfa Romeo , for SAAB , for Acura , for Opel, for Audi , for Seat , for Peugeot , for Bentley , for Skoda , for Daewoo, for Benz , for Daihatsu , for Land Rover, for BMW , for Vauxhall , for Citroen, for Volvo , for Fiat , for VW , for Ford , for Jaguar
 
Japanese car
for Standard OBD2 Cars from 2005 to Now:
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota.
 
Warning:
 

Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.

Please Leave us message in below format, we will reply you within 3 hours.

For example : BMW E60, 2005, 2.0cc, Diesel

 

Not Support Russian Cars, VAZ,UAZ,LADA

Not works with Trucks, Pickups, Vans

For Ssangyong Actyon from 2009 to 2017 years.

For Ssangyong Korando 2.0 TD Diesel , from 2013 to 2017 years.

For Ssangyong Kyron 2.0 Diesel , from 2010 to 2017 years.

For Ssangyong Rexton 2011 to 2017 years

 
KONNWEI KW808 Support Protocols
1.ISO9141-2(5 baud init,10.4Kbaud)
2.ISO14230-4 KWP(5 baud init,10.4Kbaud)
3.ISO14230-4 KWP(fast init,10.4Kbaud)
4.ISO15765-4CAN(11bit ID,500 Kbaud)
5.ISO15765-4CAN(29bit ID,500 Kbaud)
6.ISO15765-4CAN(11bit ID,250 Kbaud)
7.ISO15765-4CAN(29bit ID,250 Kbaud)
8. SAE J1850 PWM (41.6 Kbaud)
9. SAE J1850 VPW (10.4 Kbaud)
 
KONNWEI KW808 Specification
- Operating temperature: 0 - 60 Deg.C.
- External power: 8 - 18V power provided via vehicle battery.
- Display: Backlit, 128 x 64 pixel display with contrast adjustment.
- Dimensions: 7 x 3.7 x 1.4 inch.
- Cable length: About 56 inches.
- Material Type: Rubber Plastic
- Package weight: 0.795 kg
- Package Size(L x W x H): 25.00 x 18.50 x 7.00 cm / 9.84 x 7.28 x 2.76 inches

 

 

Package List


1 x KW808 code scanner 
1 x OBD II cable (140cm)
1 x Carrying case
 

 

 

 

 

 

 

 

 

Hot Products

2021 hottest multi-functional high-quality black color unique design battery tester for all 6-12V ...
Hot selling KONNWEI KW650 motorcycle grass cutter vehicle diagnostic battery scanner fit for all 6...
2.0 Inch Screen Konnwei Car Diagnostic Scanner KW590 OBD2 diagnostic tools Display Backlit m 128*64 ...
konnwei kw850 car Diagnostic Scanner multi language free update for all 12V OBDII cars fault code ...
KW309 Diagnostic Tool OBD2 Auto Code Reader For All 12V OBD2 Cars Trucks konnwei catalog-official- ...
KONNWEI KW310 OBD2/OBDII Diagnostic Car Scanner &Code Reader For All Cars konnwei catalog-official- ...