Height 350mm Round Demister Pad In Vessel Knitted Wire Mesh
Height 350mm Round Demister Pad In Vessel Knitted Wire Mesh
Description| Size: | Diameter 1800mm | Material: | SS304 SS316 |
|---|
| Height: | 350mm | Use: | Rectifying Tower |
|---|
| Packing: | Wooden Case | Product Name: | Demister Mist Eliminator |
|---|
| Feature: | Collect Fine Droplet | Section: | 7 Pcs Or As Per Order |
|---|
| High Light: | height 350mm demister pad in vessel,round demister pad in vessel,knitted mesh demister pad in vessel |
|---|
SS304 Height 350mm Round Type Knitted Wire Mesh Demister Pad
Demister Pad collect liquid particles accompanying airborne
droplets in the vapor phase after boiling, vacuum evaporation or
bubbling process. Droplets grow in size their weights become heavy
so they are fall free. It is making clean products at the top.
Demister mist eliminator Specifications in this case
Item | Value | Unit |
Material | SS304 | / |
Shape & Size | Φ1800 | mm |
Mesh Thickness | 300 | mm |
Demsiter Height | 350 | mm |
Wire Diameter | 0.23 | mm |
Mesh Density | 216 | kg/m3 |
Void Fraction | 0.973 | / |
Specific Area | 474 | m2/m3 |
Grids | 25*3 flat bar | mm |
It is appropriate for collecting very fine particles (1-3 micron)
and effective for evaporator, washing equipment, compressor and
absorption column, etc. Normally, 200mm to 300mm thickness mesh pad
is used.
Where are DEMISTER units used?
Knockout drums and separators – save on capital costs by decreasing
vessel size-recover costly fatty acids from stream-reduce
compressor maintenance by preventing scale build-up.
Absorbers – reduce overhead losses of glycols in dehydrators to no
more than 0.1 gal/MMSCF natural gas-cut losses of absorption oil
and amines in CO2 systems.
Scrubbers – reduce chemical discharges from Kraft mill smelt
dissolver tank to less than 0.11 kg/dry ton (0.25 lb/dry ton) of
pulp-improve scrubber efficiency by removing particulates carried
in entrained liquids.
Distillation columns – improve product purities and increase
throughput capacities for petrochemicals, organic intermediates,
fine chemicals.
Evaporators – prevent carryover loss of valuable products, keep
condensate TDS <10 ppm for highest quality boiler feed
water-clean up vacuum ejector stream discharge-lower maintenance in
vapor re-compression systems.
High pressure steam systems – provide dry steam- cut TDS to <10
ppb in condensate-eliminate build-up on turbine blades.
Refinery towers – increase throughput capacity-take deeper cuts for
greater product yields – prolong catalyst life in downstream
cracking and reforming units by reducing carbon and metals in side
draws-use lower grade crudes.
The material for demister pad we have in stock.
PP, PTFE, SS304, SS304L, SS316, SS316L, SS201, SS202, SS310S,
SS321, Copper, Nickel, Titanium, Duplex 2205, Duplex 2507, NS-80,
Monel 400 alloy, Co-knit 904L+fiber glass, Co-knit 316L+ fiber
glass, Co-knit 316L+PP flat...
Also we can handle other materials, but please specify when
ordering.
