• Intelligent Work Modes

The default work mode is regular model:upload interval is one-day one ping, the data packets information includes GPS status, longitude and latitude, cellular signal Strength, satellite numbers, battery level etc, there are multiple track modes available from the device, below is the explanation for work mode priorities:

Track mode>Warehouse >Regular mode =Clock mode=Week mode= Motion and static mode；

The work mode which is equal can be replaced by each other and the last configuration will prevail

• Temperature detect 

The device built-in temperature sensor, it detects the temperature once the device is turned on, then will read it every 16 seconds. The temperature accuracy 95%.

• Wifi failure feature 

After powering on the WIFI twice in a row, the serial port did not report any information, and followed the positioning packets it will report a WIFI failure alarm.

• Network and bands lock 

P: Network priority

P=1 Lock GSM

P=2 Nbiot Priority,CAT-M Second,GSM final

P=3 CAT-M Priority,GSM Second,NB OFF ,Defaulted

P=4 Lock CAT-M

P=5 Nbiot Priority,GSM Second,CAT-M OFF

P=6 CAT-M Priority,NB Second,GSM OFF

P=7 Nbiot Priority,CAT-M Second,GSM OFF

BandNBiot: Nbiot Bands;ALL-Bands,Multiple bands are separated by half-width commas, for example:B1,B3,B5

BandCAT-M1: CAT-M1 Bands;ALL-Bands,Multiple bands are separated by half-width commas, for example:B1,B3,B5

When set this parameter, please restart the device to make it executed.