|
[China]
Trade Verify
Address: Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China
Contact name:Cai
Zhejiang Canaan Kaixinlong Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Overview of the machine:
Auxiliary machine:
1.Dust colletor(standard) 2.Metal detector(option) 3.Capsule polisher(option)
4.Empty capsule transfer(option) 5. Vacuum transfer of powder(option) 6.Lifter feeder(option) 7.Mini-pill , pellets filling device 8.Sampling inspection balance(option) |  |
Technical parameters:
| Output | 800Capsules/min |
| No.of segment bores36 | 6 |
| Suitable fof capsule | 00#-5# |
| Total power | 4.5Kw(Standard configuration) |
| Overall weight90 | 1000Kgs |
| Overall diemensions | 840(+339)mm×820(+339)mm×2000m |
| Noise | ≤75DB(A) |
| Pressure | 0.4 ~ 0.7Mpa |
| Air consumption | ≤6m³ |
| Vacuum | -0.03 ~ -0.06Mpa |
| Filling error | ±2.5%~±5% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
The process of capsule filling:
Expansion diagram of the working principle:
principle The seeding tube is equipped with multiple circular holes and
communicate with the capsule hopper, and the channel is equipped
with capsule tablets. The seeding sac tube slides up and down to drop the empty capsule
into the pore channel. When the seeding capsule tube goes up, the
capsule piece will jam the capsule. When the seeding tube falls
down, the capsule holder rotates and drives the capsule to release
the capsule, and the capsule falls out of the hole. |  |
Orientation of the empty capsule:
Body cap separation of the empty capsule:
Rejection station:
Use Some empty capsules may keep the body cap still for some reason,
and remain in the upper module hole; to prevent mixing into the
finished product, they are removed before the capsule is closed. Principle A push hand that can reciprocate up and down, located between the
upper module and the lower module, with a thimble hand. When the
upper and lower modules rotate, the push hand stops at the lower
limit position and the thimble breaks away from the upper module.
When the module stops at this station, the push hand goes up and
the thimble mounted on the push hand is inserted into the upper
module hole. ①. If there is a pulled out capsule cap in the upper mold hole, the
upward top has no impact on the capsule cap. ②. If there is an open empty capsule in the upper mold hole, the
upper module is pushed out by the upward thimble and sucked into
the air chamber. |  |
Locking station:
Use Lock the capsule of the push rod to meet the requirements of the
finished product. Principle The upper and lower modules are rotated to the lock, when the axis
of the upper and lower modules overlap. The upper baffle above the
module begins to move against the top bar below. The upper baffle
presses the capsule cap, the top rod rises, and the capsule cap
body is closed and locked |  |
Finished capsule discharge station:
Use The finished capsules will be pushed out for collection. Principle The main component of the device is a discharge top rod that can
reciprocate up and down. When the upper and lower modules carrying
the closed capsule are rotated above the exit station and stopped,
the capsule is pushed out of the module hole. The capsule was then
blown into the outgoing hopper and slid into the stock barrel. |  |
Cleaning station:
Use The cleaning unit cleans the module for access to the next cycle. Principle When the upper and lower modules are dragged under the main working
plate and parked at the cleaning station, they are placed at the
gap of the cleaning device. At this time, the compressed air is
opened, and the powder in the mold hole and the broken skin are
blown out of the mold hole from the lower direction of the lower
module. The vacuum suction system placed above the mold hole draws
it into the vacuum cleaner to keep the mold hole clean and to
facilitate the next cycle operation. |  |
Material feeding method:
 |  |  |
| Manual feeding | Lifter feeder(option) | Vacuum feeder (option)
|
1.Add the material to the hopper manually. 2.Large dust, high labor intensity. 3.No cost, to adapt to the smaller batch production | 1.Through the transition feeding pipe, with a soft connection. 2.The feeding process is closed, no dust overflow, safety and
health. 3.Adapt to the mixture of materials, can control to solve the
problem of material stratification. | 1.Compact structure, tight, no dust pollution, safety and health,
low noise. 2.Simple installation, easy to operate, the transport is well
adapted to the requirements of the filling machine. 3.Applicable to the 2.7m storey-high clean workshop. |
Capsule feeding method:
| Feeding manually:
1.The capsule was manually added to the capsule bucket. 2.Applicable for smaller batch production |
| Automatic transfer of empty capsule(option)
The bottom capsule delivery tube is connected to the compressed
air, and the automatic capsule delivery machine delivers the
capsule to the capsule bucket, without the need for manual capsule
addition. Automatic bag delivery machine is easy to operate, can
automatically start and stop feeding, to ensure the continuity of
the machine operation. |
 |  |  |
| Capsule polisher(option) | Capsule polisher with sorter(option) | Vertical capsule polisher(option) |
1.Capsule special polishing equipment, can remove the dust and static electricity on the surface of the capsule, improve the surface smooth. 2.Using infinite speed regulating motor, hopper height adjustable. | 1.In addition to dust and polishing, eliminate static electricity, can also automatically remove the loading, shell, debris and body separation capsules. 2.Using frequency conversion speed regulation, sensitive and reliable speed can withstand a large start torque, synchronous belt output power to achieve low noise operation.
| 1.With capsule polishing, sorting, and improved functions, leaving high space for connecting to subsequent devices. 2.The entrance and exit can be adjusted by 360° circumference to facilitate production and save floor space. 3.The use of fast assembly connection structure makes the disassembly and installation of the machine more convenient and quick. |
Other anxiliry machines:
Metal detector(option) | Metals in separable materials The integrated metal foreign body rapid removal system can be
detected even if the metal is sealed in the product A variety of caliber is optional, models to meet all practical
applications Compact structure and easy to install |
Industrial dust collector | It is used to remove and collect the residual dust under the capsule filling machine, the residual waste in the mold hole, etc |
Closed station turntable:
1.Use the imported silicone sealing ring to reduce the condition
that the powder is brought into the turntable due to the expansion
of the movement axis, and smooth operation, high accuracy;
2.It solves the complicated problem of installing and dismantling
the mold, reduces the labor intensity of the staff, and strengthens
the service life of the station rotary table.
Three-dimensional adjustment mechanism:
Copper collar:
 | 1.Hard column: stable particle weight, loading amount close to the
maximum value, one or two groups of filling rods have obvious
beating, the adjustment range is too small, the machine load is
large, the corresponding parts wear fast. 2.Soft column: stable grain weight, large adjustment range, small
load, small wear of parts. Half column: sometimes appear puff powder particle weight and
light. 3.Scattered sand: leakage, dirty machine table, installation
difference. The gap type copper ring can be replaced with the
sealing type. |
 | According to the material situation, the company provides the optional replacement copper ring |
Vacuum separation mechanism:
Modular powder filling mechanism:
Other performance:
