Active Member
|
[China]
Address: Room 616, 6 / F, Kam Tin Industrial summer, 135 Connaught Road West, West, Hong Kong
Contact name:Shirley Liao
Hong Kong JYJC International Trade Limited |
|
|
Medical And Home Use Blood Glucose Meter With OLED Display
Product specifications:
1. Shows parameters are: blood oxygen saturation value, pulse
frequency, pulse column
2. OLED color display
3. AAA *2 batteries
4. Low voltage indicator
5. Automatic switch machine function
6. Four direction adjustable
7. two colour OLED display,more display modes
8. Two parameters:SPO2,pulse reate
9. SPO2 measurement range:70%-99%
10. colour :Blue, Pink, Green, Gray, Purple
Packaging:
Dimension(L×W×H)
57mm×31mm×31mm
Net Weight:55g
Color box Dimension(L×W×H)
80mm×60mm×38mm
Carton Box Dimension(L×W×H)
430mm×340mm×200mm
Gross Weight(100pcs):5.4Kg( no include batteries)
| Problems | Possible causes | Solutions |
| Blood oxygen or heart rate doesn't show properly | 1. Fingers are not properly placed ;2. The patient's blood oxygen value is very low and can not be detected. | 1. Please put your finger in correctly and try again 2. Please try a few more times. If you confirm that this product has no quality problems, please go to the hospital to confirm it. |
| Blood oxygen or heart rate shows instability | 1. Fingers are not deep enough. 2. The fingers shake or the body moves. | 1. Please put your fingers in correctly and try again ;2 Please try to keep your body still.
|
Unable to boot
| 1. The battery may be undercharged or not ;2. The battery may not be properly installed ;3. The machine may be damaged. | 1. Please change the battery ;2. Please re-install the battery ;3. Please contact the local customer service center.
|
The light suddenly went off
| 1. When there is no detection signal, this product is set as automatically shut down after 8 seconds ;2 . The battery is insufficient.
| 1. normal ;2. Please replace the battery.
|
Screen display "Error3" or" Error4"
| 1. The battery voltage is too low ;2, receiver or wiring is damaged ;3, receiver installation error ;4, amp circuit failure.
| 1. Please change the battery ;2. Please contact the local customer service center ;3. Please contact the local customer service center ;4. Please contact the local customer service center.
|
