Active Member
|
[China]
Address: No.410, Donghuan Road,Shiajing ,Baoan District Shenzhen China
Contact name:Tina
Shenzhen Onetop Technology Co.,Ltd |
|
|
FEEDBACK TYPE AGING TESTER SYSTEM
LH-60V/100V (20A-30A-60A)
ELECTRIC ENERGY TYPE INTELLIGENT EXCHANGE ENERGY SAVING AND POWER SAVING
Product Features
The electric energy feedback aging cabinet can be recycled, which means when charging, the electric energy will be feedback from the three-phase grid to the battery pack, and when discharging, the electric energy will be feedback from the battery pack to the three-phase grid
1 . The energy flows in two directions, and the discharge energy is fed back to the power 93% ( DC bus efficiency),
2. The middle computer and the lower computer both use 32-bit ARM chip can buscommunication, the data transmission speed is fast and the performance is stable.
3. DCAC module adopts space vector modulation technology and digital control, which makes the voltage utilization rate higher and the current harmonic shunt smaller.
4 DCDC module adopts advanced PID control technology and multiple software hardware protection mechanism to ensure the stability of equipment operation,
5. Fast output current conversion, no overshoot phenomenon, avoid the impact of the device on the battery pack.
6. CAN2. 0 interface, which can access BMS data of battery pack,can control battery pack status in real time during charging and discharging process.
7. Support the same port and different port battery aging test
8. Voltage detection adopts 4-wire system.
9. Integrated anti reverse connection module to prevent battery reverse connection;
10. / discharge status LED indication. Charge discharge curve analysis diagram. support scan code function.
11. It can be integrated into the production line, cooperate with the production rhythm, and can also be detected separately.
12 Be able to communicate with pack production line, such as OPC, and other interface protocols;
13. Support battery pack temperature acquisition.
| Type | Digital |
| Dimensions | 960mm*600mm*1750m |
| Supply voltage | 380(V) |
| Power | 2000(W) |
| Weight | 200(Kg) |
| Current measurement range | 1-600(A) |
| Current measurement accuracy | 0.1(A) |
| Voltage measuring range | 1-110(V) |
| Voltage measurement accuracy | 0.1(V) |
| Measuring range of internal resistance | 0.1-100(mΩ) |
| Internal resistance measurement accuracy | 0.1(mΩ) |
| Temperature measurement range | -10-40(℃) |
| Temperature measurement accuracy | 0.1(℃) |
| Capacity measurement range | 1-600(AH) |
| Capacity measurement accuracy | 0.1(AH) |
Our Company
Shenzhen Onetop Technology Co Ltd , is a manufacturer which
combines R&D and marketing ,we have professional R&D team
as well as proficient stuff ,and has been specializing in
researching and producing high quality lithium battery machine for
10 years . Our main products ranges from 18650 battery pack
assembly machine ,Power Battery PACK assembly machines ,Power Bank
Assembly machine,Mobile Phone Battery assembly Machines,Battery
safety test equipment,Injection molding machine,Molds, Molding
materials, machine parts, etc
We keep in place with the word ,we adopt lastest technology and
design ,our Onetop series battery machine stands out in the same
industry area ,they are of national advanced technologycal level
and have been identified by experts from Shenzhen Science &
Technology and Information Bureau .Up to now ,we have obtained many
inventions patents ,practical new patents ,and own independent
intellectual property rights
.
With the increasing development ,We have created two workshops to
manufacture battery machines and injection molding machines
Through our efforts, the Automatic Battery PACK Assembly machines
are now widely used in Mobile phone,Power bank,Laptop,Electric
bikes,Electric vehicle,solar street lights,Solar energy
storage,Banks,LED devices,Health Equipments ect,the low-pressure
injection molding machines are now widely used in PCBs, sensor
products, wiring harnesses, medical electronic products, etc. In
addition, OEM/ODM services can be provided to customers worldwide.
Our products enjoy high quality and guarantee all-weather
after-sales service, thus winning our 70% market share.we look
forward to cooperation with the customers all over the world .
Our Main product
1. Automatic Battery PACK Assembly Line
2. Power Battery PACK machines
3. Power Bank Assembly Line
4. Battery safe test machine
5. Injection Molding Machine
Packing and shipping
*Be Packed by Wooden Box
*Lead Time: Standard Machine: 7-10 working days
*Customized Machine: 30-35 days
FAQ
1. Who are we?
We are based in Guangdong, China, start from 2010,sell to Domestic
Market(50.00%),North America(15.00%),South America(5.00%),Eastern
Europe(5.00%),Western Europe(5.00%),Southeast
Asia(3.00%),Oceania(3.00%),Eastern Asia(3.00%),South
Asia(3.00%),Mid East(2.00%),Central America(2.00%),Northern
Europe(2.00%),Southern Europe(2.00%). There are total about 51-100
people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Lithium Battery Assembly Automation Line,Battery Spot Welding
Machine,Battery Sorting Machine,Battery Comprehensive Tester
System,Battery Aging Cabinet
4. Why should you buy from us not from other suppliers?
We have a strong technical R&D team and have been working in
the lithium battery assembly and manufacturing industry for many
years with rich experience. The company now has a variety of
specifications and models of machinery and equipment, various
series
5. What services can we provide?
Accepted Delivery Terms: FOB,EXW
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,PayPal;
Language Spoken:English,Chinese
Contact us
Ms.Tina (Sales manager)
Cel/Wechat/whatsapp:+86-13543252590
Email: tina@battery-machines.com
Add:No.410,Donghuan road,Shajing,Bao'an district,Shenzhen,China
