Active Member
|
[China]
Address: No.118, Shangshang Road, Licheng Town, Liyang, Changzhou city, China
Contact name:Zhou
Jwell Machinery (Changzhou) Co.,ltd. |
|
|
YF Series PS Foam Profile Extrusion Line, consists of single screw
extruder and the special co-extruder, with the cooling water
tank, hot stamping machine system, haul-off unit, and stacker. This
line with imported ABB AC inverter control, imported RKC
temperature meter etc. and features of good plasticization, high
output capacity, and stable performance etc.The hot stamping
machine system combined foreign technology, by the hot stamping
embossing method,
transfer the coating layer from the film to the PS foamed profile.
The machine with good appearance, stable performance,
accurate & easy operation. By adjust the embossing wheel the
machine can work on various of different profiles.
Working together with the main extruder and other extrusion down
steam equipments, this line is popular as the latest
developed producing line.
Related Products
By adopting the foreign and domestic advanced technology, we
successfully developed the small profile extrusion line.This line
consists of Single Screw Extruder, Vacuum Calibration Table,
Haul-off Unit, Cutter and Stacker, the producing line features
of good plasticization, high output capacity, low power consumption
and etc. The main extruder speed controlled by imported AC
inverter, and temperature control by Japanese RKC or FUJI
temperature meter, vacuum pump and traction gear reducer of the
downstream equipment are all good quality products, and also easy
maintenance.
PE&PP Wood-Plastic Two Step Extrusion Line
Two-step way is that the wood-plastic composite materials complete
in different equipment of mixing, from play, extruding products,
mixing the raw material in a certain formula, forming wood-plastic
particles in the middle, and then squeezing out products. And
nowadays, the two-step way is used currently, application of a
wider general use dual-cone-or two-extruder granulation, and then
double-cone or single screw extruder extrusion products, mainly
used in floor indoor or outdoor,parapets, tray, such as PE plastic
extrusion products. Because of the advantages: simple operation,
lower requests to the overall technological level and to the
matching mold and extrusion equipment than the one-step, and also
smaller investment on equipment relatively.
1.Building block type screw and barrel of the extruder, according
to the L/D by yourself. It’s fit for all kinds of the material
machining for the surface wearable. The temperature of barrel
can enactment by oneself each zone.
2.The method of the head cutting is heating cut commonly.
3.The method of cooling remove the material is two class or three
class fan remove commonly.
This extrusion line mainly contains conical twin screw extruder
、glue extruder 、vacuum calibration unit 、haul-off unit 、cutter and
stacker. It adopts intelligent control system, high automatic
system, with feature of stability, easy operating and high
efficiency. By changing different types of mold, it can produce all
kinds of fast loading wallboard with different types, sizes,
shapes, thickness. With rich production experience, JWELL can
provide on-site installation and debugging services freely,
including operation train and raw material formula, to insure the
customer can operate autonomously.
The production line is mainly used for the production of the Great
Wall panels, wall panels, partition walls, pinch plate, acoustic
panels, stair railing, shutters, decorative, foot line and any
other eco- wood plastic productions. The extruder with the unique
screw design prevents raw material from high shear or over
plasticizing, As a result, products gain significant texture of
wood surface, and product with characteristics: no deformation,
non-fading, fire prevention, anti-corrosion, anti-moth, anti-aging
and anti-UV.
Sander
This machine suits for the thickness sanding, fine sanding and
polish the
surface of other various boards.
Transfer printing machine for door
The machine is used for surface design transferring of wood-plastic
door,wood-plastic cabinet door board, PVC door and wall board.
Using high temperature transferring, this machine can automatically
remove dust and have board pre-heating device.
WPC embossing machine
The wood-plastic embossing is mainly used for the pattern of
repression of PEPPPVC wood plastic profile,sheet surface,it's
better for the wood products surface of wood texture.the
surface of the embossing can be processed all kinds of wood
texture,surface can be hard chrome plating,Roller cavity
heating,simple operation and wear-resistant.
Suitable for testing kinds of material and products. Under the
climate changes of sunshine, temperature, humidity,
condensation etc, In order to test related products and
material aging degree. In a short time get discoloration, fading
and so on.
Mainly used in testing the impact toughness of hard pla4stic sheet,
pipe, profile, enhance nylo4n, glass, steel, ceramics, cast stone,
electr4ical insulation, and other non-metalli4c materials.It
is the ideal test 4equipment for chemical industry,
scientific research units, universities and colleges, quality
inspection departments and professional manufacturers.
It allows for the measurement of melt mass-flow rate (MFR) and melt
volume-flow rate (MVR), melt density test, not only suitable
for the high melting temperature engineering plastics, but
also for low melting temperature plastics. It is widely used
in chemical industry, scientific research units, universities
and colleges, quality inspection departments.
Brief Infomation of JWELL MACHINERY CO., LTD
Founded in Shanghai, China 1997,has developed into 5 production
bases including Shanghai, Suzhou, Changzhou, Zhoushan and Guangzhou
with more than 1000mu area,which is the largest plastic extrusion
manufacturer in China with 18 professional subsidiaries, 9 big
metal-working workshops and 4 big heat-treatment nitration
workshops. JWELL MACHINERY (CHANGZHOU) CO., LTD. is another
development strategy center of Shanghai JWELL Machinery Co.,ltd,
locating at Jiangsu Zhongguan cun technology industrial park,
Liyang city, Jiangsu province and has a high qualified R&D
and experienced mechanical and electrical engineer team as well as
advanced processing foundation and normative assembly shop.
Jwell is the largest plastic extrusion manufacturer in China with
18 professional subsidiaries, 9 big metal-working workshops and 4
big heat-treatment nitration workshops. Production capacity:20
set/sets per Month.We can provide on-site installation and
debugging services freely, including operation train and raw
material formula , to insure the customer can operate
autonomously.Warranty:12 months.
Jwell hot sale PE & PP wood plastic composite extrusion line
Jwell PVC (WPC) fast loading wallboard extrusion line
Jwell PVC(WPC) Co-Extrusion Foam Board extrusion line9
Welcome to Jwell!
