Home Companies JSUS ELECTRONIC TECHNOLOGY CO.,LIMITED

Die-cast aluminum microwave outside sensor lights

Active Member

Contact Us

[China]

Address: No.17-3L,Heyue Mansion,Longgang Avenue,ShenZhen City,Guangdong Province,P.R.China

Contact name:Jenny Lin

JSUS ELECTRONIC TECHNOLOGY CO.,LIMITED

Die-cast aluminum microwave outside sensor lights

Country/Region	china
City & Province	shenzhen guangdong

Product Details

Sensor LED wall lights
Sensor LED ceiling light
Sensor LED bulkheads
With material of die-casting aluminum for outdoor use.
With 5.8GHz Sensor for on-off control or for tri-level dimming control (corridor function)
Can be customized with built-in Dali sensor.
Integrated microwave motion sensor and LED driver 2-in-1.

High quality of microwave sensor driver used:
1: ISM 5.8GHz, ISM wave band
2: MV sensors are CE, TUV, RoHS and R&TTE approved.
3: 100% stable.
4: Detection area, time delay and daylight control precisely set via DIP switch, flexible adjustment and self-controlLED.
5: 3 years warranty.
6: Large detection area with 16m Dia ×6m
7: 3-step dimming function
8: Automatic on-off
With sufficient ambient light, the sensor dose not switch on the lamp.
With Insufficient ambient light, the sensor switches on the lamp when motion is detected.
After hold time, the lamp gradually dims down if no motion detected.

Combination of motion sensor and RF radio wireless transmission as maters and salve. Easy installation and free of wiring.
With fixed address coding technology, it is easy to set up transmission groups through the rotary switch. Up to 16 channels can be grouped and programmed.
The transmission can reach to 30 meters indoor and 100 meters in the open area.
Optional transmission frequency of 433/868 MHz, thanks to FSK mode.

Daylight harvest
The photocell can read and measure the surrounding natural daylight, and calculate how much artificial light is needed against the target value, then convert the right amount of light to
1-10V electronic signal output.
Available as:

1: Standard on/off + 5.8GHz ISM microwave sensor
2: Standard on/off + 5.8GHz ISM microwave sensor + emergency pack
3: Standard on/off + DALI Dimming+ DALI HF sensor
4: Standard on/off + RF Master/Slave+5.8GHz ISM microwave sensor + emergency pack
5: Standard on/off
6: Standard on/off + emergency batteries
Any powers can be customized.

Lamp Size:	Φ280 x 100mm
Power:	10W
Input Voltage:	12/24V DC, 100/220V AC
Angle of Coverage:	120x360°
Brightness Sensitivity:	1-2000lux adjustable
Time-delay:	5 seconds - 5 minutes adjustable
Detective Range:	2-10m adjustable
Color Temperature:	2700-6500K
Working Temperature:	-20 to +30°C
Working Life:	50,000 hours
Warranty:	2 years

Hot Products

Wireless Panic Button

产品特点及功能 ◆ 无线紧急按钮具有紧急报警触摸发送功能,在关键时候可起到紧急呼救的作用. ◆ 待机时间长,适应范围广. ◆ 采用无线信号传输,无需布线. 技术参数工作电压:DC3V(CR2450纽...

Wireless water leakage alarms

产品特点及功能 ◆ 全密封防水外壳无需担心浸水. ◆ 探头抗氧化. ◆ 无线调频+跳频信号报警,无线抗干扰能力强. ◆ 电池供电,功耗低,使用时间长. ◆ 无需连线,安装简单,不受交流电源停电影响. ...

Indoor light energy wireless detector

产品特点及功能: ◆ 太阳能(室内灯光)供电设计,无需外接电源线,2到5年无需更换电池 ◆ 待机电流小至微安级. ◆ 采用433MHz FSK+跳频无线信号,解决了无线信号容易被干扰和误收误报的问题. ...

Solar Wireless Photoelectric Smoke Detector

产品特点及功能: ◆ 太阳能(室内灯光)供电设计,无需外接电源线,3到5年无需更换电池 ◆ 采用美国微芯公司的光电感烟探测专用芯片,可用于对各类早期火灾发出的烟雾做出报警. ◆ 光学迷宫,光电探测方式...

Wireless Gas Detector

产品特点及功能: ◆操作真人语音提示,中文和英文可选. ◆采用高可靠性催化燃烧式传感器. ◆可显示燃气浓度(PPM). ◆交流供电和内置可充电电池(选配)双电源不间断供电. ◆微处理器智能控制. ◆传...

Wireless Infrared Detector

产品特点及功能: ◆ 无需外接电源线,1-2年无需更换电池. ◆ 待机电流小至微安级. ◆ 抗电磁,强光,小宠物干扰,误报率极低. ◆ 两级灵敏度可调,自动温度补偿,能根据环境温度的变化自动调整灵敏度...