Fingerprint Access Control&Time Attendance

Build-in access controller and Digital keyboard Manage

Operating Mode: Password

Specification
Supply Voltage: DC12V
Working Current: less than 1000 mA
Static current: less than 80 mA
User capacity: 200 passwords
Operation Temperature: -10°C-70°C
Operation Humidity: 10%-90%

Wire Connection
Red line: +12V
Black line: GND
Orange line + Block line: Switch
Blue line (+) + Black line (-): Electricity lock
Yellow line: Empty
Black line: GND
Brown line + green line: Doorbell

Access control machine program method

1. Password Opening Door Mode.
*Press Key # four times, the Buzzer make long sound BI, POWER (Red), OK (Green), Mode (Yellow) is on at the same time.
*Input 5 digits PIN (Default Password is 12345), OK (Green) is off. The machine enters Making Program Status.
*Press key 2, MODE light (Yellow) is on, POWER (Red) and OK (Green) light are off.
*Input 5 digits password to open a door (Such as: 00008), the POWER (Red) and OK light (Green) flash.

*Press Key 6 to Exit programming status.

2. Other Setting

a. Change Default Programming Password
*Press key 1, The MODE (Yellow) light is on, POWER (Red), OK (Green) light is off.
*Input PIN as your will (Example, 23456), the Buzzer make a short sound of BI, OK (Green) is on, POWER (Red), MODE (yellow) is on, PIN has changed successfully. Press Key 6 to Exit. Note: The PIN should be kept; you will need it to enter the Making Program Mode next time. If PIN forgotten, please execute Machine Initial Step.

b. delete the single password
*Press key 3, MODE light (yellow) is bright, POWER (Red) and OK (green) light are off.
*Input 4 character user series No that needs to be deleted. (Series No on card, such as: 0008), a sound BI will be heard. This means the deletion is successful. Press Key 6 to Exit

c. Delete all passwords
*Press key 4, BI will be heard twice. All the registered passwords are deleted. Press Key 6 to Exit

d. Open Door Time Setting

*Press key 5, MODE light (Yellow) is bright, POWER (Red) and OK (Green) are off.
*Input 2 character as the door open time (Such as: 05, means that the door open time is 5 second), sound BI will be heard twice, this means the door open time setup is successful. Press Key 6 to Exit