|
[China]
Trade Verify
Address: No. 8, Longxiang Avenue, High-tech Industrial Park, Yantan District, Zigong City, China- 643000
Contact name:Ruida Jing
Zigong Jingruida Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
High Hardness OEM ODM Custom Tungsten Carbide Mechanical Seal Bushing
BK15 hard alloy cemented tungsten carbide mechanical sleeve bushings K10 K20 K40 carbide bushes
ZGJRDCC Tungsten carbide bushing has superior performance on resisting abrasion and corrosion, which is widely used in many industries.
TC Bushing/bearing bushing /Spacer sleeves are working in an
abrasive environment due to rotation, friction, etc. and the
particles involved in the media.
Tungsten carbide bushings with wear and corrosion resistance and a
high fracture toughness for demanding axial thrust. and could meet
API standard disaster bushing requirement
| Grade | Tungsten Carbide Seal Rings , Mechanical Seal, Sealing rings YG6/YG8/YG8C/YG11/YG11C |
| Heat resistance | 900℃ |
| Density | 14.5 g/m3 |
| Certificate | ISO9001 |
| Application | Mechanical seals, pumps, valve |
| Size | OEM |
| Feature | Superior wear,Corrosion resistance |
| Customized | Available |
| Standard or Nonstandard | Nonstandard |
ZGJRDCC are good at customizing tungsten carbide products for you ! Our factory has provided hundreds of customized super wear-resistant and corrosion-resistant tungsten carbide parts for the Middle East, South America and other countries and regions for petroleum mining and chemical industries.
| Grade | Density | Typical Value | Application Scope | |
| (g/cm3) | Hardness | Bending Strength | ||
| YG3 | 15.10~15.30 | 92.5 | 1700 | Superior wear resistance only less than YG3X, sensitive to impact and vibration, suitable for cast non-ferrous metal and its alloy finish turning, semi-finish turning, thread finish turning and hole expanding. |
| YG3X | 15.10~15.30 | 93.6 | 1450 | Best wear resistance in Tungeten and Cobalt alooy, but not good in anti-impact proprety, suitable for cast iron, non-ferrous and alloy, quenched steel, alloy steel small cutting section machining at high speed. |
| YG6X | 14.80~15.00 | 92.4 | 2000 | Belong to small granule Tungsten carbide alloy, wear resistance higher than YG6. Suitable for machining cold and hard alloy cast iron and heat resistance alloy steel, as well as finish machiing for normal cast iron. |
| YG6 | 14.80~15.00 | 91.1 | 2100 | High wear resistance but less than YG3, better anti-impact and anti-vibration than YG3X, Suitable for cast iron, non-ferrous and alloy, non-metal material semi-finish machining and finish machining. |
| YG6A | 14.8~15.00 | 92.8 | 1850 | Belong to small granule alloy, wear resistance hig, suitable for semi-finish machining of cold and hard cast iron, non-ferrous and alloy, as well as semi-finish machining and finish machining for quenched steel, alloy steel |
| YG8 | 14.6~14.80 | 90.5 | 2300 | High bending strength resistance, better anti-impact and anti-vibration than YG6, suitable for cast iron, non-ferrous and alloy, non-metal material rough machining at low speed. |
| YG522 | 14.20~14.40 | 92.5 | 2000 | High wear resistance, and high strength, special grade for bamboo and wood processing, also suitable for non-ferrous and non-metal material cutting process. |
| YG546 | 14.55~14.75 | 90.5 | 2700 | High flexibility and high strength, withstand high impact load, suitable for stainless steel and cast iron rough processing |
| YG610 | 14.60~14.80 | 93.5 | 2000 | High wear resistance and high hardness, suitable for cast iron, high temperature alloy, quenched material cutting continuous and discontinuously. |
| YG640 | 13.10~13.30 | 91.5 | 2300 | Impact resistance and anti-oxidant, suitable for large cast piece cutting continuous and discontinuously, and anti-heat steel, high strength steel milling and digging. |
| YG643 | 13.60~13.80 | 93.3 | 1700 | High wear resistance, high anti-stick property, suitable for cast iron, high temperature cast iron, high temperature alloy, stainless steel, quenched steel and non-ferrous processing. |
| YG813 | 14.30~14.50 | 92 | 2200 | Good wear resistance, high bending strength resistance and anti-stick property, suitable for processing high temperature alloy, stainless steel and high Manganese steel and other material. |
Grade as following :
YG6,YG6X,YG8,YG8.2,YG8L,YG15,YG20,YG20C,YG20D etc are the traditional material,suitable for the normal tungsten carbide roller.
1. Tungsten carbide bushing has the characteristics of wear resistance and impact resistance.
2.It is the supporting parts used in the mechanical parts, in order
to achieve sealing, wear protection and other functions.
In the field of valve applications, the tungsten carbide bushing is
in the bonnet and is the corrosion-resistant materials for sealing.
3.In the field of bearing application, the carbide bushings are
used to reduce wear between the bearing and the shaft seat, and to
avoid the increase of clearance between shaft and hole.
Zigong Jingruida Cemented Carbide Co.,Ltd.
1.more than 7 years manufacture experience in tungsten carbide
2.Implement strict quality testing and control procedure to make superior quality. (ISO9001)
3.we can accept all kinds of international payment.(L/C, D/A,D/P,T/T, Paypal,western union,money gram, etc.)
4.we can accept all trade terms
5.Reply your inquiry within 5 hours
6.We are professional factory, so our price is lower than others
7.Professional sales person
8.Perfect Oral English communication service
FAQ
1.Q: Are you a manufacturer?
A: We are the manufacturer and the factory is in Zigong City,
China.
2.Q: Can you customize products for me?
A: Yes, we support OEM&ODM.
3.If you need customized products, please tell me the following
information.
-. carbide grade
-. carbide type and application
-. detailed dimensions(it is better to have a technical carbide
drawing)
-. product's surface treatment
-. other requirements
