Shenzhen Jnicon Technology Co., Ltd. |
Verified Suppliers
|
|
Main Feature
1. Advanced structure: IP67 self locking connector
2. Multicore:2,3,4,5,6,7,8,9 to 32 pins are optional
3. Connection method: soldering(welding),screw terminal
4. Assembly: cable to cable ,male and female without cable
5. Certifications: UL, TUV, CE,ROHS,CQC.
6. Connection method: push pull locking type
Electrical Parameters | |
Number of Poles | 3 |
Current Rating | 50A max |
Voltage Rating | 600VAC max |
Durability Voltage | 2500VAC @ 60 s. |
This M25 waterproof power Connector has a waterproof rating of
IP67. To assemble the M25 Outdoor Waterproof Connector,only a
Philips Screwdriver is required to attach the two wires inside each
main body. Once each side is connected, the wiring is fully
protected from the elements.
Technical Parameters | |
Contact Resistance | 10 mΩ max |
Insulation Structure | 500 MΩ at 500VDC |
Operating Temperature | -40°C ~ +105°C |
IP Class | IP67 (1m / 30min) |
Mold Material | PA66 |
Contact/Terminal Material | Gold Plated Brass |
Seal Material | Silicone |
Once assembled, the M25 Outdoor Waterproof Conector is easy to
plug and play while keeping the elements and water out of splices
and junctions. To disconnect, just unscrew the main body and pull
apart the two ends.The M25 Waterproof conector has multiple
waterproofing levels, consisting of o-rings, waterproof sealant,
and flexible end seals designed to tighten and close awhen screwed
together.
Operation Parameters | |
Voltage Rating | 600VAC max |
Current Rating | 50A max |
Min Wire Size OD | 6.5mm ~ 10mm |
Max Wire Size OD | 10.5mm ~ 18mm |
Max.Cable Cross Section Area | 0.5mm2 ~ 6.0mm2 |
M25 waterproof power connector is the perfect solution to make your own waterproof connection cables easily. Thanks to its screw based terminal, soldering is not required and installation just takes a few minutes.