|
[China]
Trade Verify
Address: B-9,Fubilun industrial park,Chaoyang Road,Yanchuan,Songgang,Bao'an,Shenzhen,China.
Contact name:Carly Lu
Shenzhen Jnicon Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
| Operation Parameters | |
| Voltage Rating | 600VAC max |
| Current Rating | 50A max |
| Min Wire Size OD | 6.5mm ~ 10mm |
| Max Wire Size OD | 10.5mm ~ 18mm |
| Max.Cable Cross Section Area | 0.5mm2 ~ 6.0mm2 |
M25 waterproof Circular connector is the perfect solution to make your own waterproof connection cables easily. Thanks to its screw based terminal, soldering is not required and installation just takes a few minutes.
| Technical Parameters | |
| Contact Resistance | 10 mΩ max |
| Insulation Structure | 500 MΩ at 500VDC |
| Operating Temperature | -40°C ~ +105°C |
| IP Class | IP67 (1m / 30min) |
| Mold Material | PA66 |
| Contact/Terminal Material | Gold Plated Brass |
| Seal Material | Silicone |
Once assembled, the M25 Outdoor Waterproof Circular Conector is
easy to plug and play while keeping the elements and water out of
splices and junctions. To disconnect, just unscrew the main body
and pull apart the two ends.The M25 Waterproof conector has
multiple waterproofing levels, consisting of o-rings, waterproof
sealant, and flexible end seals designed to tighten and close awhen
screwed together.
This M25 circular power connector has a waterproof rating of IP67. To assemble the M25 Outdoor Waterproof Connector,only a Philips Screwdriver is required to attach the two wires inside each main body. Once each side is connected, the wiring is fully protected from the elements.
If soldering version needed, its also avialble.
