JK-HSD57 60VDC Nema 23 Closed Loop Stepper Motor Driver

 JK-HSD57 60VDC Stepper Motor Driver for Nema 23 Closed Loop Stepper Motor

JK-HSD57 is one of the models in Jkongmotor series easy servo drives which can take 20-80 VDC operating voltage and output 0.1 -10A continuous load-based current. It is capable of driving NEMA 17, 23, 24 and 34 easy servo motors (stepper motors with encoders) with the position loop closed in real time.

 Features:

• Step and direction control

• Closed position loop for no loss of movement synchronization

• Operating voltage: 20-80 VDC

• Load based output current of 0.1 - 10 A

• High torque at starting and low speed

• No torque reservation

• High stiffness at standstill

• Significantly reduced motor heating

   

• Smooth motor movement and extra low motor noise

   

• Quick response, no delay and zero settling time

   

• No loss of steps; no hunting; no overshooting

   

• Plug-and-play and no tuning

   

Using environment and parameters
 

 
Mechanical installation diagram
                     
 
Interface description
1) Control signal interface circuit

 
2) High voltage interface

 
3) 232 Communication interface
It is possible to connect a PC or STU debugger with a dedicated serial cable, and forbid charged plug. Through STU or the PC software ProTuner, the subdivision and current value, effective edge and single double pulse all can be set, and can also be used for the elimination and adjustment of the resonance point.

 
 
Applications:

• Use for robots stepper motor;
• electronic automatic equipment stepping motor ;
• medical instrument stepping motor;
• advertisement instrument stepper motor;
• lighting&audio equipment stepper motor ;
• printer stepper motor;
• textile machinery stepper motor;
• cnc router stepper motor.