|
[China]
Trade Verify
Address: Building A2,Hutang Industrial zone,Lingdao Rd,Wujin District,Changzhou,China.Zip:213162
Contact name:Annie
CHANGZHOU JKONGMOTOR CO.,LTD |
|
Verified Suppliers
|
|
|
Brushless Dc Electric Motor For Mechanical Arm 48v 36v 4000RPM 184W
Genaral Specification:
Winding type | Delta |
Hall effect angle | 120 degree electrical angle |
Shaft run out | 0.025mm |
Radial play | 0.025mm@460g |
End play | 0.025mm@4000g |
Max. radial force | 75N @ 20mm from the flange |
Max. axial force | 15N |
Insulation class | Class B |
Dielectric strength | 500VDC for one minute |
Insulation resistance | 100MΩMin., 500VDC |
Electrical Specification:
| Model | ||
| Specification | Unit | JK57BLS04 |
| Number Of Phase | Phase | 3 |
| Number Of Poles | Poles | 4 |
| Rated Voltage | VDC | 36 |
| Rated Speed | Rpm | 4000 |
| Rated Torque | N.m | 0.44 |
| Rated Current | Amps | 6.8 |
| Rated Power | W | 184 |
| Peak Torque | N.m | 1.32 |
| Peak Current | Amps | 20.5 |
| Back E.M.F | V/Krpm | 7.1 |
| Torque Constant | N.m/A | 0.068 |
| Rotor Inertia | g.c㎡ | 230 |
| Body Length | mm | 107 |
| Weight | Kg | 1.25 |
| Sensor | Honeywell | |
| Insulation Class | B | |
| Degree of Protection | IP30 | |
| Storage Temperature | -25～+70℃ | |
| Operating Temperature | -15～+50℃ | |
| Working Humidity | 85% or under 85% RH(non condensing) | |
| Working Environment | outdoor(no direct sunlight),Non-corrosive Gas, Non-inflammable gas, No oil fog, No dust | |
| Altitude | 1000m or under 1000m | |
We can also manufacture products according to customer's requirements.
Drawing:
Ideal Applications for BLDC Motors
We’ve seen that BLDC motors offer high efficiency and controllability, and that they have a long operating life. So what are they good for? Because of their efficiency and longevity, they are widely used in devices that run continuously. They have long been used in washing machines, air conditioners, and other consumer electronics; and more recently, they are appearing in fans, where their high efficiency has contributed to a significant reduction in power consumption.
They are also being used to drive vacuum machines. In one case, a change in the control program resulted in a large jump in rotational speed—an example of the superlative controllability offered by these motors.
BLDC motors are also being used to spin hard disc drives, where their durability keeps the drives operating dependably over the long term, while their power efficiency contributes to energy reduction in an area where this is becoming increasingly important.
Toward Wider Usage in the Future
We can expect to see BLDC motors used in a wider range of applications in the future. For example, they will probably be widely used to drive service robots—small robots that deliver services in fields other than manufacturing. One might think that stepper motors would be more suitable in this type of application, where pulses could be used to precisely control positioning. But BLDC motors are better suited to controlling the force. And with a stepper motor, holding the position of a structure such as a robot arm would require a relatively large and continuous current. With a BLDC motor, all that would be required is a current proportionate to the external force—allowing for more power-efficient control. BLDC motors may also be replacing simple brushed dc motors in golf carts and mobility carts. In addition to their better efficiency, BLDC motors can also deliver more precise control—which in turn can further extend battery life.
BLDC motors are also ideal for drones. Their ability to deliver precision control makes them especially suited for multirotor drones, where the drone’s attitude is controlled by precisely controlling the rotational speed of each rotor.
In this session, we have seen how BLDC motors offer excellent efficiency, controllability, and longevity. But careful and proper control is essential to taking full advantage of these motors’ potential. In our next session, we will look at how these motors work.
