Xhorse VVDI2 Commander Key Programmer With Basic , BMW and OBD Functions

Original Xhorse VVDI2 Commander Key Programmer With Basic, BMW and OBD Functions, Newly Add BMW FEM/BDC Function

Original Xhorse VVDI2 Commander Key Programmer With Basic, BMW and OBD Functions

Newly Add BMW FEM/BDC Function, please pay to this BMW FEM/BDC Function
VVDI2 - BMW FEM/BDC system (function released and available)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

This device can cover all the functions of BMW Multi Tool. Since the hardware limitation of BMW Multi Tool, some functions can't be updated. We recommend customers to buy VVDI2 with BMW functions for easy update and more functions in the future.

Notice:

Not including CAS4+ function, if you want it, please buy this service alone VVDI2 BMW CAS4+ Authorization

Package List:

1. VVDI 2 Main Interface
2. 5th BDM Programmer
3. OBD2 cable
4. CAS Plus (additional part, need to buy alone CAS Plug for VVDI2 BMW or Full Version : 84.99usd)
5. Remote Programmer
6. USB Cable