CK-100 Auto Key Programmer V99.99 Newest Generation SBB With 1024 tokens

Newest Generation CK-100 Auto Key Programmer V99.99 SBB
1.support multi-language and have much more function than SBB key programmer.
2.Support Languages: English, Italian ,Dutch, French, Spanish, Portuguese, Turkish
3.with 1024 tokens
The Latest Generation CK-100 Auto Key Programmer V99.99 SBB

Top 5 Reasons to Get the CK-100 Key Programmer

1. Newest Version: V99.99
2. This CK100 is with 1024 tokens
3. Support Languages: English, Italian ,Dutch, French, Spanish, Portuguese, Turkish
4. Better than SBB, same functions with CK-100 SK117 but cheaper.
5. More powerfull and functional, Excellent Quality

Note:

1. Can't Update

2. If CK100 fails to adapte key during programming, please disconnected OBD16 adapter and car, then connect again after 10 seconds, otherwise vehicle immo system may be damaged, CK-100 key programmer will be locked too.

CK 100 Key Programmer Image Display:

CK-100 Key Programmer Reviews:

By Zio Jay:I m an auto tech/ smog tech & locksmith.Here's my two cents on this product.
Pros: Started right up. Easy to use. Yes, does newer cars. Some cars need a PIN number "sometimes" to program the key. Excellent upgrade from my old SBB.
Cons: Programs "limited" amount of vehicles. Its got built-in tokens. Once it runs out of tokens, its gonna be a paperweight.
For the price, its well worth buying. This tool has already paid for itself.

By Shawn:Worked for me, so far I have programmed a 2005 Ford F-150 and a 2005 Mazda 6. Initially I could not program the f150, every time I would go though the ten minute security waiting period It would say no loaded key. So I made sure all the code were cleared and used the erase all key function instead of the add key function. After the 10 minute waiting period it will say all keys erased then it goes into programming mode. Simply place the 1st key to be programmed wait 5 second then the next and so on. Note if you already had a key programmed use the one that was previously programmed 1st then the others. On the Mazda I replaced the PCM and simply used the add a key function. Came with 1024 tokens only used one so far using the erase feature with the ford. From what I understand if you use the add a key function on the ford it uses 8 tokens per key.

CK100 Key Programmer Packing List:

1pc x Main Unit
1pc x USB Cable
1pc x Power Supply
1pc x Packing Carton
How to use CK100 auto key programmer:

Firstly, Prepared two keys, one key can start the engine, another one cannot (blank key) and
connected cable to the device.
Secondly, Connected obd2tuning CK100 auto key programmer v45.6 device into the OBD socket.
Next, Turned on obd2tuning CK 100 pin code device.
Following was selecting car model according to obd2tuning V45.6 CK100 instructions.
Then, Inserted a key and turned the console.
Turned ignition on then removed the key.
After that, allowed to add a blank new key while left ignition off.
Waiting for 45 seconds (max 60 seconds) until the safety access procedure was completed.
Finally, blank key has been stored. Tried the second key and the engine can be started by the end.
Real case:CK100 Key Programmer add VW Transporter key
CK-100 Key Programmer V99.99 FAQ:

Q: Can I use CK-100 V99.99 do Toyota G chip and Ford?
A: Yes, you can do Toyota G chip with it. And you need pin code to do the Ford.

Q: Dose it support French?
A: Yes! CK-100 Key Programmer V99.99 supports 7 languages for your need including English, Italian, Deutsch, French, Spanish, Turkish and Portuguese.

Q: What is the difference between CK-100 key programmer V99.99 and CK-100 V45.02?
A: Both of them have the same functions. But the version is different. CK-100 V99.99 is newer and cheaper than CK-100 V45.02.