Throughout the entire operation the device must be connected to the
PC in the "CONNECTED TO PC "
mode.
Duration of the entire operation varies from some tens of seconds
to some minutes, according to
the key to be copied and the power of the computer used.
4D Cloning Tool
Notes:
1) Throughout the entire operation the device must be connected to
the PC in the "CONNECTED TO PC
" mode.
2) Duration of the entire operation varies from some tens of
seconds to some minutes, according to
the key to be copied and the power of the computer used.
HOW TO Make a Copy of a Key with 4D Cloning Tool Program?
1. If you plug 4D CLONING TOOL device in USB port first time
operation system offer to install the
driver of located device.
2. Choose the manual installation method with point of driver
directory (it is 2nd method).
3. Point the directory to folder "FTDI / driver " from CD. If you
have done everything correctly,
then the operation system will confirm that the new device already
installed and ready to work.
4. Detect the number of USB port in which you plug in the 4D
CLONING TOOL device.
5. Click by right button on "My computer " icon.
6. Choose "System property -> equipment->devices manager ".
7. Open "Ports (COM and LPT) ".The virtual COM port of device
connection will located like "USB
Serial Port ".The copy works for keys used on the vehicles
indicated in the specifications
attached to this document, or accessible through the INFO button in
the 4D CLONING TOOL
program.Start the "4D CLONING TOOL PROGRAM " from the Menu:Start
Programs 4D Cloning TOOL Program
of the "4D CLONING TOOL " type of device in your possession which
it is connected, then click on
that the program can detect the communication. If the version of
the not up to date, a special
message update.
8. Make sure the device is on, connected to the PC by the serial
port, and the display shows
"CONNECTED TO THE PC ".For the device to operate properly, do not
place it close to the PC
monitor, PC, power input point, or other electric equipment that
generates magnetic fields.When
the program has detected the device click on the "Start " button on
the same video screen:Every
time the "Start" button is pressed the settings selected will be
saved on the disk.Follow the
instructions on the PC video, complete with illustrations and short
of the operations
to be carried out at each step.