Dawson Machinery & Mould Group Co.,Ltd |
Verified Suppliers
|
|
High Performance Vertical Shaft Impact Crusher
VI Series Vertical Shaft Impact Crusher have another name called
Sand Maker
Sand Maker is high-performance equipment for sand making and
shaping, is researched and produced by our corporation through
absorbing the advanced technology from Germany, and has achieved
world advanced standards. This equipment has two types:
Rock-on-rock and rock-on-iron. Sand yield of "rock-on-iron" type is
higher by 10-20% than that of "rock-on-rock" type.
(1) Usage of Sand Maker
1. It is used for producing building aggregate, concrete, aggregate
for road surface and roadbed, asphalt concrete and cement concrete.
2. It is also used for sand making and shaping in the field of
engineering such as water conservancy, hydroelectric power,
high-class highway, railway, bridage and municipal works.
3. It is used in fine crushing of ming industry such as building
materials, metallurgy, chemical engineer, ming, anti-fire material,
cement ect.
4. Sand Maker is used for producing glass raw material and quartz
sand ect.
(2) Working Principle
Material falls down to impellor cavity. Under great centrifugal
force, it hits material that coming downwards. After hitting each
other, they force a vortex between impellor and shell, and hit each
other several times, finally smaller stone comes out, and goes to
vibrating screen. Satisfactory material is transported by conveyor
belt. However overlarge material will go back to sand maker to be
recrushed. Output sizes can be made according to customer's
requirement.
(3)Features and Benefits:
1, Simple and reasonable structure, lost running cost.
2. High crushing rate, energy-saving.
3. It has fine crush and coarse grinding function.
4. It is little affected by the moisture content, and the content
can get up to about 8%.
5. It is suitable to crush midium hard, hard special materials.
6. Excellent product of cubic shape, and small fraction of
elongated flaky particle shape.
7. Small wear from Impeller liner, and easy maintenance.
8. Working Noise is lower than 75 decibel, dust pollution.
MODEL | UNIT | SMC-03A | SMC-05A | SMC -08A | SMC-10A | SMC-15A | SMC-20A | SMC-25A | SMC-30A | SMC-40A | SMC-50A |
Cooling Capacity | WATTS | 8250 | 11324 | 20540 | 28400 | 43100 | 58600 | 69700 | 86200 | 117200 | 139400 |
BTU/HR | 29000 | 38650 | 77300 | 97000 | 147200 | 199850 | 237700 | 294400 | 399700 | 476000 | |
KCAL/HR | 7308 | 9740 | 19480 | 24444 | 37094 | 50362 | 59900 | 74189 | 100724 | 119952 | |
Refrigerant Type | R22 | ||||||||||
Compressor Motor | KW | 2.2 | 3.3 | 6 | 7.5 | 11.25 | 15 | 18.5 | 22.5 | 30 | 37.5 |
HP | 3HP | 4.5 | 8 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | |
Condenser Fan Flow Rate(A) | CHM | 2390 | 3900 | 7800 | 9200 | 12600 | 18900 | 18900 | 23400 | 31200 | 39000 |
Fan DiaΦ | MM | 300*2 | 400*2 | 450*2 | 500*2 | 500*3 | 550*3 | Φ 600*3 | Φ 630*3 | Φ 500*6 | Φ 500*8 |
Fan Power | WATTS | 74W*2 | 145W*2 | 273W*2 | 273W*2 | 382W*3 | 614W*3 | 708W*3 | 795W*3 | 708W*6 | 708W*6 |
Water Tank capacity | LITER | 65 | 65 | 140 | 220 | 380 | 500 | 500 | 520 | 630 | 800 |
Water Pump | HP | 1/2 | 1/2 | 1 | 1 | 2 | 2 | 3 | 5 | 7.5 | 7.5 |
KW | 0.37 | 0.37 | 0.75 | 0.75 | 1.5 | 1.5 | 2.2 | 3.75 | 5.62 | 5.62 | |
Flow Rate | L/MIN | 50-100 | 50-100 | 100-200 | 100-200 | 160-320 | 160-320 | 250-500 | 400-800 | 630-1200 | 630-1200 |
Running Current | AMP | 6 | 9 | 13 | 15 | 27 | 38 | 45 | 58 | 75 | 95 |
Insulation Material | POLY-FOAM TAPE RUBBERIZED TUBU INSULATION | ||||||||||
Dimension L*W*H | MM | 1100*615*1080 | 1100*615*1080 | 1380*750*1450 | 1480*750*1450 | 1700*1100*1750 | 1800*1100*1750 | 1830*860*1900 | 1980*860*1950 | 2300*1800*1980 | 2550*1800*2100 |
Net Weight | KG | 155 | 155 | 320 | 420 | 600 | 730 | 780 | 920 | 1050 | 1100 |