Rust Prevention Auto Brake Pad Cp5200 Fit Rim 17/18

Jekit Car Semimetal Meterial Auto Brake Pad Cp5200 fit for front

What do you usually do for brake maintenance?

The items that need to be done for brake maintenance are:

 High temperature protection of the car pad;

 Lubrication and maintenance of brake cylinder;

 Brake disc cleaning;

 Brake fluid replacement;

 Rust prevention and lubrication of contact surfaces of tire screws, brake discs and steel rings.

Brake maintenance refers to the inspection and maintenance of the brake system in a specified period. Its purpose is to slow down and stop the vehicle. The principle is the energy conversion process of converting the kinetic energy of the vehicle into heat energy through friction. The components of the brake system are: brake pedal, booster, master cylinder, ABS auxiliary, oil pipe, brake cylinder and friction components of each wheel.

1. High temperature protection of brake pads

Prevent the corrosion of the brake system, prevent the brake pad from biting due to the high-temperature surface, eliminate the brake pad scream, and maintain good lubrication durability. The product with ceramic composition shall be resistant to high temperature of more than 1400 ℃. Therefore, regularly check the thickness of brake pads or brake shoes. When it is found that its thickness is close to or less than the minimum thickness specified by the manufacturer, it shall be replaced immediately.

2. Lubrication and maintenance of brake cylinder

Lubricate the movable shaft and cup of the brake wheel cylinder, keep the wheel cylinder bushing soft and prolong the service life of the wheel cylinder. It is necessary to use fully synthetic brake wheel cylinder lubricating oil.

3. Brake disc cleaning

Quickly clean the oil stain, dirt and friction dust of the brake disc, brake drum and any parts to keep the brake disc cool; Eliminate the harsh noise of braking and promote uniform braking.

4. Brake fluid change

Brake oil has water absorption characteristics. If it is not replaced for a long time, it will corrode the braking system and bring hidden dangers to driving. Generally, it is recommended that the owner replace the brake oil every 20000 km. Mainly to ensure the cleanliness of brake oil.

5. Rust prevention and lubrication of contact surface between tire screw, brake disc and steel ring

Prevent corrosion, prevent screws and surfaces from being bitten by heat, and facilitate disassembly. Aluminum containing products with high temperature resistance of more than 1100 degrees are required to ensure the contact area with brake pads and improve braking force