|
[China]
Trade Verify
Address: No.25, Gaoxin 6th Road, Hi-tech zone, Xi'an, China
Contact name:Lee M
XI‘AN ZZTOP OIL TOOLS CO.，LTD |
|
Verified Suppliers
|
|
|
API Blowout Preventer 13 5/8" x 5000 psi Double Ram BOP SHAFFER TYPE
Doule Ram BOP is an important equipment for oil and gas well pressure control service. The double RAM BOP is designed with high quality front packer, top packer and seal assembly for intermediate flange, which assures fine working performance under high and low temperature or acid environment. The Ram BOP is mainly composed of housing, side gate, hydro-cylinder, cylinder cap, piston, piston rod, lock shaft, sealing parts, ram, etc. Oil well's sealing or opening is achieved by moving ram, which is driven by piston rod and piston with hydraulic force.
Type of RAM BOP
* The RAM BOP can be divided into single ram, double ram and three ram BOP.
* According to the ram opening and closing method,there are hydraulic control BOP and manual control BOP.
| No. | P.N. | Description | Qty | Unit |
| 2 | Double Ram BOP | |||
| 2.1 | Type:SHAFFER Bore size:13-5/8",Working pressure:5000PSI Lock:MANUAL Booster cylinder:Yes Shear capacity:Yes Standard:API SPEC 16A 4RD PR1,Non-metalic material class:BB,Metalic material class:T-20 Trim H2S:the blowout preventer surfaces exposed to well bore fluids meet the requirements of NACE standard MR0175 Top connection:13-5/8"5000PSI,flanged Bottom connection:13-5/8"5000PSI,flanged API ring gasket BX160 Side outlet: Two API side outlets 3 1/8" x 5000 psi beneath each set of ram on both sides, API ring gasket RX35. The Outlets should be covered by API blind flanges 3 1/8" x 5000 PSI. Ram size which should be installed inside each BOP according to API standard: 13 5/8" x 5",13 5/8" x blind All flanges should be stainless steel ring groove. Each BOP should be marked "TOP" installation position Each BOP should be supplied with hand wheel mechanism to mechanical locking. Open / close connections:1"NPT Coating color:red, API monogram:yes, | 1 | set | |
| 2.1.1 | Ram Assembly 13 5/8” x 5” x 5000psi | 3 | set | |
| 2.1.2 | Ram Assembly 13 5/8” x Blind” x 5000psi | 3 | set | |
| 2.1.3 | Ram Assembly 13 5/8” x 3 1/2” x 5000psi | 2 | set | |
| 2.1.4 | Ram Assembly 13 5/8” x Blind Shear 5” x 5000psi | 2 | set | |
| 2.1.5 | Rubber set for Ram Assy 13 5/8” x 5” | 5 | set | |
| 2.1.6 | Rubber set for Ram Assy 13 5/8” x Blind” | 5 | set | |
| 2.1.7 | Rubber set for Ram Assy 13 5/8” x 3 1/2” | 5 | set | |
| 2.1.8 | Complete Seal Kit for BOP | 3 | set | |
| 2.1.9 | Seal Kit for Shear Ram | 2 | set | |
| 2.2 | Type:SHAFFER Bore size:11",Working pressure:5000PSI Lock:MANUAL Booster cylinder:Yes Shear capacity:Yes Standard:API SPEC 16A 4RD PR1,Non-metalic material class:BB,Metalic material class:T-20 Trim H2S:the blowout preventer surfaces exposed to well bore fluids meet the requirements of NACE standard MR0175 Top connection:11"5000PSI,flanged Bottom connection:11"5000PSI,flanged API ring gasket RX 54 Side outlet: Two API side outlets 3 1/8" x 5000 PSI beneath each set of ram on both sides, API ring gasket RX35. The outlets should be covered by API blind flanges 3 1/8" x 5000 PSI. Ram size which should be installed inside each BOP according to API standard: 11" x 5", 11" x blind All flanges should be stainless steel ring groove. Each BOP should be marked "TOP" installation position Each BOP should be supplied with hand wheel mechanism to mechanical locking. Open / close connections:1"NPT Coating color:red, API monogram:yes, Packaging:standardsteel box. | 2 | set | |
| 2.2.1 | Ram Assembly 11” x 5” x 5000psi | 3 | set | |
| 2.2.2 | Ram Assembly 11” x Blind” x 5000psi | 3 | set | |
| 2.2.3 | Ram Assembly 11” x 3 1/2” x 5000psi | 2 | set | |
| 2.2.4 | Ram Assembly 11” x Blind Shear 5” x 5000psi | 2 | set | |
| 2.2.5 | Rubber set for Ram Assy 11” x 5” | 5 | set | |
| 2.2.6 | Rubber set for Ram Assy 11” x Blind” | 5 | set | |
| 2.2.7 | Rubber set for Ram Assy 11” x 3 1/2” | 5 | set | |
| 2.2.8 | Complete Seal Kit for BOP | 3 | set | |
| 2.2.9 | Seal Kit for Shear Ram | 2 | set |
About JC Wellhead
Jingcheng Petroleum Machinery Manufacturing Co.,Ltd was established in 2008, we are specialized in design and manufacturing of the oilfield wellhead equipment. We - YCJC are a registered supplier for CNPC, GWDC, CCDC in China.
In 2012, JC wellhead jointed with ZZ TOP Oil Tools, and found the office in Xi'an mainly engaged in abroad marketing, through these years of efforts, our wellhead equipment is exported to many countries, such as Thailand, UAE, Iran, Brazil, Argentina, USA etc. and enjoyed good reputation from the customers.
Product Scope
*BOP : Taper Rubber Annular BOP, Spherical rubber Annular BOP,
Single Ram BOP, Double Ram BOP
* Wellhead Equipment: X-mas tree, casing head, casing hanger,
tubing head, tubing hanger, casing spool, tubing spool, API Clamp,
API Clamp Hub
* Wellhead valve: Gate valve, Choke valve, Check valve, Mud valve,
and valve parts
* Wellhead adapter: Double studded adapter flange, spacer spool,
riser spool, drilling spool, weldneck flange, union flange adapter
* Other wellhead equipment parts: Hammer union, Elbow, swivel
joint, block cross, Block Tee,
* Oil well manifold: choke manifold, kill manifold, testing
manifold
Welcome to contact us for more information!
